Refrigerators - Answered Questions & Fixed Issues

Program code is located on the serial plate

Press and hold the Door Alarm keypad.

Press and hold the Freezer Temperature Down keypad within 3 seconds.

Release the door alarm keypad and wait 3 seconds.

The control will display PE to indicate the programming mode.

Press the Freezer Temperature Down once more.

The control will display the current Program Code. This should be the same as the program code on the serial plate. If the code is correct, press the Door Alarm keypad for three seconds to exit.

Press the Refrigerator Temperature Up keypad or Refrigerator Temperature down keypad to change the digit value. The decimal point indicates the selected digit. Press the Freezer Temperature Up keypad to select the next digit. Once the correct program has been entered, press and hold the Freezer Temperature Down keypad until the program code begins flashing indicating it’s been saved. Exit the programming mode by pressing any key.

Maytag... | Answered 3 hours ago | 19 views

So does it need the ER room at the local hospital?

Error codes: ER, E or E0 ' Sleep Number

Error codes: ER, E or E0. When ER or EO is displayed, it means there is a communication failure between the Firmness Control system's base unit (pump) and ...

In such questions we always need

make, model, what it is

Refrigerators | Answered 7 hours ago | 17 views

Look on the spec label that shows voltage, amps, model number and serial number. This is often at the rear near the mains wire or on a label inside the fridge.

Frigidaire... | Answered 7 hours ago | 21 views

the refrigerant may need refilling/toping up, how old is the refrigerator ?

GE Refrigerators | Answered 4 hours ago | 35 views

Check the temperature is correct for your setting.

Whirlpool... | Answered 18 hours ago | 20 views

Remove the door and reverse the brackets, mount it to the opposite side. Be careful when removing and mounting as it's not extremely heavy but awkward and you can damage the threads in the body of the unit itself, just be careful and get a family member, friend or neighbor to help. I just done this a few weeks ago, a bit of competent help is best!

Let me know if this is helpful by clicking "Helpful", feel free to leave very brief review or follow me, I deal with automotive/mechanical/technical and other subjects relevant to daily life. Thanks and have a great day!

LG Refrigerators | Answered 22 hours ago | 26 views

Half a dozen things it could be. What is model #?

GE Refrigerators | Answered Yesterday | 32 views

Replace the hose that’s leaking

Frigidaire... | Answered Yesterday | 24 views

I would use a vacuum cleaner.

Refrigerators | Answered Yesterday | 26 views

If you have high voltage alarm, that will not stop light from coming on. Would make sure alarm is correct. First unplug fridge for 30 seconds then plug back in this should reset alarm If alarm stays off you should be OK if alarm comes back on have someone to check with voltmeter to make sure voltage is high. If not you probably need control board.

Daewoo... | Answered Yesterday | 33 views

Not finding what you are looking for?
Refrigerators Logo

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4655 Answers


Level 3 Expert

83843 Answers

Brad Brown

Level 3 Expert

17804 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides