Washing Machines - Page 4 - Recent Questions, Troubleshooting & Support

That is how it supposed to be. These new machines are high efficiency. They use minimal water and heating and less detergent as well. The rinses should be marginally more.

Oh, I just noticed it is a top loader. Contact the seller for service. Make sure you aren't on the 'Small Wash' cycle.

Samsung Washing... | Answered 3 days ago

To those who are posting that your washer is filling but not agitating or spinning, check the lid switch. Often times the bar that engages the lid switch gets bent or some play in it and will not fully engage the switch. You can check the switch by feeling for the switch (usually on the left side near the back - under the top) and engaging it with a screwdriver. I was able to get mine working by pounding it with my fist above the switch, with the door closed (Fonzi style :) I then bent the metal bar by holding it with pliers, and with the door halfway open, I pryed the door up while holding the bar tightly with the pliers.

Roper RAS8244KQ... | Answered 3 days ago

In my case it was a old connector harness located on your motor. Leads comming from tacho ( 2 red wires) were not passing thru harness. I rilpped them off and made solid but crimps.

Hope this helps a little.

Maytag MAH8700A... | Answered 3 days ago


An LE error code on the washer's display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. Performing a reset on the washer will normally resolve this error with a reduced load size.Apr 25, 2018

LG Washing... | Answered 3 days ago

Your washer is off balance or the load is unbalanced. If uL (unbalanced load) appears in display, the load is out of balance. The washer is running a load-balance correction routine.Sep 25, 2018

Maytag Washing... | Answered 3 days ago

How to reset the washing machine:
  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

Washing Machines | Answered 3 days ago

Traces of dark lines on the washer are caused by defective bearings and seals. they need to be changed.

Bosch WFE 2021... | Answered 3 days ago

Traces of dark lines on the washer are caused by defective bearings and seals. they need to be changed.

LG Washing... | Answered 3 days ago

Not finding what you are looking for?
Washing Machines Logo

256,012 questions posted

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts


Level 3 Expert

84027 Answers

Brad Brown

Level 3 Expert

18002 Answers


Level 3 Expert

825 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides