Washing Machines - Answered Questions & Fixed Issues

Contact the manufacturer's support for answers. It may need fixing or it may be normal. Some water in the bottom is normal to keep the seals wet, but you shouldn't have a lot of standing water.

Washing Machines | Answered 2 hours ago | 14 views

Bangs, thumps, grinding? If your washer is making a loud noise you can be sure it has something to do with a bearing. But which one? There are two common bearings inside washing machines: the rear drum bearing or a tub bearing.

I found this info below. Check it out for more help with your issue.

Washing Machines | Answered 3 hours ago | 15 views

Make sure the drum is actually spinning during that cycle (I bet it isnt).
If not, the clutch is slipping- I had this happen years ago. It's in the bottom of the washer as part of the gear box. When the clutch cant hold, it slips when the motor kicks into high speed for the spin. That slipping creates the smoke.
I was able to replace mine, but I had it disassembled in my garage and I like to fix things. The clutch for mine was less than $30 at the time. Been running great since.

Washing Machines | Answered 22 hours ago | 42 views

LE is speed sensor error. Easy replacement. Check YouTube. Are you sure it isn't 'tE" error. Thermistor error. Very common. Videos also on repairclinic.com or appliancepartspros.com.

LG Washing... | Answered Yesterday | 133 views

Have it repaired

Washing Machines | Answered Yesterday | 155 views

all lights are flashing on bosch classixx express no thinh working no water intake door is locked what is the problem and can i do it myself

Bosch Classixx... | Answered Yesterday | 3,892 views

Have you tried unplugging it from the hydro? It may just need to reset itself.
All machines nowadays are like computers, and need a reset every now and again. Since they don't have a reset button, it may help to unplug power and leave it unplugged for 5-10 minutes.

Kenmore Washing... | Answered 2 days ago | 23 views

The first obvious question is, did you buy it new, reconditioned or is it a used machine and if it is a used machine did you buy it from a shop or other regular business or did you buy it privately?

If you bought it from a regular business; if it is new or reconditioned there will be a warranty and you shouldn't hesitate contacting them.
If it was a used machine from a business you could still expect a repair after such a short space of time. Your purchase would constitute a contract they would have breached if the machine failed to fulfil its function for a reasonable time. A reasonable time would depend on the price paid...

If you bought it privately there is no automatic protection but you should inform the seller of your problem as they might be willing to help.

I guess there isn't much point worrying too much about what might be wrong as you probably wouldn't want to repair it yourself. One thing I do know about twin tubs and that is the spinner mostly has a much smaller capacity than the washer and they break easily when overloaded.

Good luck!

Washing Machines | Answered 9 hours ago | 47 views

seems like the water inlet solenoid isn't working you may contact samsung directly to have a repair man fix the issue since samsung has all the parts for their washers

Samsung Washing... | Answered 3 days ago | 333 views

I suggest you read the operating instructions of your machine. I don't know of such a programme - most programmes include a rinse and spin though there is usually a delicates programme that is a short low temperature wash, leaves the tub full of water (to decrease creasing) until the programmer is advanced and then a short rinse and low speed spin.

Not sure what is special about a special sweater detergent except maybe it is so mild it might behave like soap and contains a fabric conditioner - hence no rinsing. Seems it could be a gimmick...

Best way of washing treasured woollens remains hand washing using soap if possible and rinse with fabric conditioner. Pull into shape while wet and dry flat.

Samsung Washing... | Answered 3 days ago | 20 views

Hi, I'm Neninenotek, people usually call me Nenotek. There's not so much to say about me really, just like an ordinary good girl.. I drive a Honda Supra. Its my father car that he gave to me. I try to find any club and party because in every moment that i met i feel alive. Feel Free To Know Me, send me message. http://yakinqq.info/

Fisher and... | Answered 3 days ago | 1,695 views

If you're talking about the agitator, there may or may not be a nut to hold it on. If not, it simply snaps on and off.

Washing Machines | Answered 3 days ago | 16 views

The heating element may be open circuit and cause that error. The NTC is not likely to be the culprit unless it has been damaged physically.

Blomberg Washing... | Answered 20 hours ago | 28 views

Not finding what you are looking for?
Washing Machines Logo

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers


Level 3 Expert

85178 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides