Watches - Page 9 - Recent Questions, Troubleshooting & Support
Setting day and date on timex watch
For the analog Timex Indiglo with both day and date (CR 2016 Cell on back) and only the single crown available you must first pull out the stem and turn through the hours 24 at a time to get to the correct day(MON,TUES,etc.). Then you can pull the stem out only half way and set the date (1,2,3,etc.). Be careful to attend to the AM/PM time as you turn the stem for the day. Go too far and the day will change at noon and you have to wind through seven more 24 hours to correct it.
on Jul 06, 2019
My garmin footpod stopped working
The battery lid contains the positive contacts. There are three little copper teeth grouped together. One of them needs to align with a single copper contact on the pod when the lid is back on and the little dot on the lid aligns with the little dot on the pod. This whole positive contact is stuck to the lid with adhesive and it must have turned out of alignment when I changed the battery. Gently pull it out, align as described, and stick it back in. Bingo.
on Jul 04, 2019
Kaiser clock model kc-2.
remove the batheries and then advance the mintue hand slowly until you hear a clicking noice then remove both the hour and minute hand and place both at 12 oclock high postion advance the minute hand again to confirm you hear the click noise when the minute hand is at 12 and the hour hand is at 1. then replace batteries and the clock should cuckoo properly on each hour,,,,,best regards
on Jul 04, 2019
Not finding what you are looking for?