Cisco Computers & Internet - Recent Questions, Troubleshooting & Support


ok sir ..

step 1: My 1st Reason for Re install Windows Xp 2.RPU 3.1 not working.
So I am bhuvnendra re install windows xp2 this machine.
Step 2: install java+RPU 3.1
Step 3: SATA DVD drive disconnect .
Step 4: ON the system
step 5: safe mood black screen are display.
Step 6: any mood select booting o.s
Windows continue restarting.


my solution


Step : SATA DVD drive connect


system are properly booting and proper working.


please give me what is real problem in this machine.

Cisco Advanced... | Answered 3 hours ago


Cisco is one of the reputed and trusted brand names in the router market and is recognized globally. It offers a wide range of networking peripheral devices to connect you with the high-speed internet. You can connect all of your devices such as laptops, computers, and tablets, etc via WAN and LAN and enjoy the high-speed streaming. As Cisco offers strong connectivity with world-class technologies, it also gives some issues during setup and implementation. Cisco Router Tech Support service providers have a team of certified and experienced technicians, who will help you with the right way to solve the issue. They will advise you to install, set up the router, customize it, and improving the performance, etc.
For any kind of technical help during the process contact, Router Technical Support team to get an instant solution. They are available 24/7. Call Now ?+1 888 597 3962 for any Support.
More Info - https://www.quickhelps.co/phone-number/cisco/

Cisco Computers... | Answered 6 hours ago


Hi,

Depending on the Supervisor Module model, most likely it's a standard Cisco's "password recovery procedure":

Connect to the console
Reboot the switch (power cycle)
Start pressing Ctrl-C till you get to the BOOTROM
Change boot configuration register to 0x2142 (confreg 0x2142)
Boot the switch. It will ignore confuguration and boot "empty".
Go to "enable mode".
Copy startup configuration to running configuration ("copy start run")
Change boot register back to 0x2102 (conf t -> conf 0x2102)
Write config (write mem)
Reboot

Good luck,

Mike / CCNP, CCDP, CCSP, CCVP

Headset Adapters for office phone system

Cisco Catalyst... | Answered 3 days ago


Also CompTIA Network+ has a number assigned. I have one and typical questions for that cert is OSI model -also covered well in routergod.com. http://routergod.com/ccnabootcamp/osi.html I have an f2f job soon but will return.

Cisco IOS | Answered on Jul 18, 2019


That is a very good question, but that would take way more space than this forum offers. A good router tutorial, which covers the configuration from the IOS command-line interface can also be found here.

You should check out Cisco's page on EIGRP (link) or Petri's Blog about configuring EIGRP (link), but if routing protocols are in general a new thing for you, you will be better advised to get a book that covers all protocols, otherwise this might not make any sense to you.
Look for this:
CCNA - Cisco Certified Network Associate Study Guide by Todd Lammle, Publisher: Sybex
You can get it at amazon and it costs you only 20$ (used) or 30$ new including shipping. Here is a link.

If you have specific questions, I'm happy to help, but in the book it's already more than 60 pages on IRGP/EIGRP alone, so I don't really want to type that all up, plus you would need some general information as well.

Cisco (1841)... | Answered on Jul 18, 2019

Not finding what you are looking for?
Cisco Logo

Family Lines

2,250 questions posted

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2276 Answers

J John

Level 2 Expert

299 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...