Epson Office Equipment & Supplies - Recent Questions, Troubleshooting & Support
Epson wf-2530 printer error see your documentation
Turn the printer unit ON
2. Pull the power plug from the back side of it
3. wait 1 min
4. Plug unit back in
5. wait 3 full minutes
6. try to print does the error still exist? If yes continue below
Locate one piece of CARD STOCK paper and manually feed it up against the feed assembly and into the feed.Must be CARD STOCK PAPER, regular paper will not work. the idea is too dislodge any pieces of paper that may be broken off inside the rollers, and not visible to the eye. Repeat this process until the error goes away.
If you continue to experience problems, PLEASE RESPOND TO ME
The ink cartridge cover is not latched. what do i do
I had the same error on my WF-3620 with CISS and the solution is simple: my ink cartridge cover is removed and the only way how printer can determine that the ink cartridge cover is not latched is when something prevents ink cartridge carriage from moving to the right edge. In my case somewhy ink cartridge carriage got stuck and I just pushed it slightly with my hand and the error got solved. Note that you have to push ink cartridge carriage when it tries to move immediately after you press cover open sensor.
2 days ago
Why is my Epson WF7620 showing" cassette 1 insert correctly"
The switch inside that makesxeither an electrical connection orca mechanical one tells the printer that the paper tray is home loaded and awaiting commands is not being activated by the tray
The switch has become faulty overtime and needs,a replacement
The bit on the tray that pushes the tray loaded switch has broken off the tray is missing the switch or a wiring fault has developed
And the switch has no power so it still can't see the tray even if it is loaded thus error paper tray missing continuously is being displayed
3 days ago
Epson 1400 cartridge carriage jammed
The cleaning unit may still be engaged with the cartridge carriage. There may be a release mechanism on the side of the cleaning unit. The cover will have to be removed to see if that is the case. Another cause could be that the shaft or rail that the carriage travels on is quite dirty. It can be cleaned with alcohol to remove the dirt. That might be what is loading down the motor. Good Luck.
Epson Stylus ...
on Jan 11, 2019
Not finding what you are looking for?