GE Heating & Cooling - Recent Questions, Troubleshooting & Support

If your furnace is older than 1978 it has a standing pilot, which means it exists full time and is not intermittent in operation requiring a spark or hot surface ignition to ignite the pilot or pilot rail leading to the main burners.
If you depress the pilot valve button and light the pilot and hold it in for a minute maybe 2 and it drops out, the thermocouple is usually why. The thermocouple creates 30 millivolts of electricity, this is not very much power a millivolt is 1/1000th of one volt.
The 30 mv power is enough to hold the pilot valve open after you release the button after lighting the pilot, the replacement of the thermocouple is easy and they are available at any hardware store, they come in varying lengths, it is better to get one a bit longer than not long enough, you can loop the remainder.

GE Heating &... | Answered on Oct 15, 2019

You can certainly drill your own drain hole.

your problem is that you have the unit set too cold and the unit is not large enough for the size of the room. The evaporator coils are so cold they are condensing the moist air going through it.

to get rid of the smell, add a tablespoon of bleach to the water. leave it a day and then drill a hole.

GE Heating &... | Answered on Sep 13, 2019

you may find a diagram inside the electric controls panel, or somewhere on the unit. Wishing you good luck with it.

GE Heating &... | Answered on Aug 27, 2019

It would have cooling intake and exhaust outside air for the outdoor coil or radiator and the inside cool air inside. Tilt back so any condensation drains outside dripping in mid air.
If it won't fit on the window opening, then it is too big and should not be installed without modification, a difficult situation.

GE Heating &... | Answered on Aug 27, 2019

I would look for it inside the electric control panel or somewhere on the ac

GE Heating &... | Answered on Aug 08, 2019

Because it is a refrigeration device based on a freezer and a big fan. It sounds like it is doing a good job! Back off the thermostat a couple of degrees.

GE Heating &... | Answered on Jun 28, 2019

respected sir,
I am used in godrej split ac now AC starting the time is okey but after two or three minitues showing F6 .How can solve the problem please help me.
Thanking your sir,

GE Heating &... | Answered on May 16, 2019


GE Heating &... | Answered on Apr 30, 2019

Not finding what you are looking for?
GE Logo

1,264 questions posted

Ask a Question

Usually answered in minutes!

Top GE Heating & Cooling Experts

ray gallant
ray gallant

Level 3 Expert

64308 Answers

Todd B

Level 3 Expert

572 Answers

J Rosado

Level 3 Expert

1117 Answers

Are you a GE Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides