Generac Electrical Supplies - Recent Questions, Troubleshooting & Support


5w30 syn or straight 30w about a quart and then check the stick

Generac... | Answered on Jul 12, 2019


Beware of an adjustment complexity with an new kind of poweroutlet automatic voltage regulator avr , have you measured the generator UNLOADED for 230 volts ?
because it can be normal that 67 volts output changed when you connect an paint heat gun i was surprised a few weeks ago that i get an GENMAC 8000 that is a look a like generator coming from china build . first i was measuring some of the same output AC instead of 230volts.

Generac... | Answered on Jun 28, 2019


I believe you mean the fuel pump. They do fail and leak, so likely you need a replacement. Make note of where the 3 lines connect (inlet, outlet, impulse air) Also check for fuel in the crankcase (oil) and drain and replace if necessary.

Generac... | Answered on Jun 13, 2019


You will need to change jets. You may find that no one will seel it to as you are licensed.

Generac... | Answered on Jun 07, 2019


go here, join and ask any questions you have. these guys are all installers and experts in the field. good luck

https://www.zillerstore.com/

Generac... | Answered on May 17, 2019


how old is this genset?? model and year produced is helpful too.

Generac... | Answered on Mar 06, 2019

Not finding what you are looking for?
Generac Logo

619 questions posted

Ask a Question

Usually answered in minutes!

Top Generac Electrical Supplies Experts

Sheldon Dedek

Level 3 Expert

909 Answers

Bob Janelli

Level 1 Expert

26 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Are you a Generac Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...