Haier Washing Machines - Recent Questions, Troubleshooting & Support


Haier Washing... | Answered on Aug 21, 2019

This could be anything from a faulty water valve , machine not draining , faulty electronic board , faulty timer unit ...For the machine to continue it must complete its last cycle . Any fault codes showing ?, was it filling , was it draining properly ??, please contact your registered whiteware technician for proper fault diagnosys , cheers .

Haier Washing... | Answered on Aug 08, 2019

If its a top loader, most machine s have a dispenser on the top panel or somewhere in the top of the splash guard of the tub. On a front loader.... I have never seen a bleach dispenser on any of them.

Haier Washing... | Answered on Jun 17, 2019

check foe a split or a pin hole in the drain hose

Haier Washing... | Answered on May 22, 2019

Take the 4 screws out of the top section, lift up the whole top. You will see a bar. You must lift the top so the bar raises above the drum. Take the screws out of the plastic cover and check the bar .it has 2 round ends that rest in two holes. If it came out of one simply place it back in the hole. You will hear it click when pressing it. Put back together. Problem solved.

Haier Washing... | Answered on May 15, 2019

Not finding what you are looking for?
Haier Logo

1,121 questions posted

Ask a Question

Usually answered in minutes!

Top Haier Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers


Level 3 Expert

411 Answers


Level 3 Expert

85206 Answers

Are you a Haier Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides