Hard Computers & Internet - Recent Questions, Troubleshooting & Support


You can ask your tutor for extra help. Or you can search the internet via Google. Good luck, but try hard, what you learn at school affects the rest of your life after school ends. I am 66, about to retire and still learning everything I can :>)

Hard Computers &... | Answered on Feb 26, 2019


NO CD RECORDER I EVER LOOKED AT COULD DO IT . COMPUTERS ARE NEEDED TO DO THAT TASK

Hard Computers &... | Answered on Feb 21, 2019


DVR16-8600 Hard Factory Reset
Please follow the steps below to reset the DVR.
1. Power off the machine, remove the power plug from the back of the unit.
2. Take off all case cover screws located on the back and side of the DVR and remove the case.
3. There will be a small black button on the motherboard located towards the front panel of the unit, take note of its location.
4. Carefully plug the power back into the unit, leaving the case off.
5. When the unit has fully booted up, press the black button and wait for the DVR to completely reset.
6. Once reset, unplug the power cable, replace the case and screws, and replace the power cable.
The unit should now be reset back to factory default.
https://support.swann.com/dvr16-8600-hard-reset-ryyDThhaaPM
KG

Hard Computers &... | Answered on Feb 21, 2019


Incompatible Hard disk OR failing Hard disk
Change to new hard disk

Hard Computers &... | Answered on Feb 19, 2019


https://www.youtube.com/watch?v=HErn0-GcQqE check this and if not help feel free to pm i reply :)

Hard Computers &... | Answered on Feb 05, 2019


Its not that simple. As far as I know the windows software is linked to the computer the disk comes from so it won't boot up if put in a different PC. There are other ways of doing this but not for the non-techie. Do you want windows 10 or would you be happy with windows 7 on the 2GTb disk ?

Hard Computers &... | Answered on Jan 14, 2019


Programs like Recuva may work if you are going to "do it yourself".

You can pay a service to try at your oen expense.

Hard Computers &... | Answered on Dec 22, 2018


That is asking how big is a rock. What is the format.wav files are much larger than .mp3 files. What is the bit rate for .mp3? 64, 128, 256 320 kbps?. I Have over 14000 and it takes 406 GB. that said I only use .wav or 320 kbps, each is a file that may contain 20-30 songs, or it may 1 hour long. So That drive will hold more songs than you have, and if you think it is not large enough buy 128 GB or 256 GB. personally I would not worry about it,

Hard Computers &... | Answered on Dec 13, 2018


You might be able to remove the drive and have it connected to another computer with a device. May want to pay a computer tech or computer repair store to do the work. They may have a bootable CD that can access it depending version of Windows or other system.

Hard Computers &... | Answered on Dec 11, 2018


You may need to pay a technician at a store to help you.

If you want to do it yourself, there are many software products available online to try to see if data can be recovered from a USB hard drive, but I suspect from your question's wording that you woud have a difficult time learning how to do so. You have not stated the type of damage, or the kind of error messages you receive, so it is not easy to suggest anything other than paying a service to attempt to recover it for you.

Hard Computers &... | Answered on Dec 05, 2018


Possible procedure for another model.

https://www.manualslib.com/manual/757069/Signet-Qv-3020.html?page=15#manual

Quoting: "Chapter 5: DVR Setup -
5.15 Video Mode
This option enables you to select between PAL and NTSC video formats.
This unit comes packaged with PAL format cameras for use in your region; as such
you should not change this setting.
Chapter 5: DVR Setup -
5.16 Factory Reset
Press the [ SEL] button to restore the unit to default, the DVR will reboot and all
settings (including the password) will be restored to the factory default settings.
Caution: There is no confirmation dialog box after pressing the [ SEL] button!
If you have forgotten your password:
And the unit is not recording; keep the system on the main screen, and then press
the [Pause] button ten (10) times in succession, the DVR will then reboot with default
settings. Note: The default password is the [CH1] button six (6) times.
If the DVR is recording, you will need to disconnect the HDD to force the machine
to stop recording prior to resetting the machine to default. "

Hard Computers &... | Answered on Dec 05, 2018

Not finding what you are looking for?
Hard Logo

356 questions posted

Ask a Question

Usually answered in minutes!

Top Hard Computers & Internet Experts

john smith

Level 2 Expert

402 Answers

 Mike M
Mike M

Level 3 Expert

3324 Answers

gbob59

Level 3 Expert

3042 Answers

Are you a Hard Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...