Kenwood Car Audio & Video - Recent Questions, Troubleshooting & Support

According to the manual, the aux input for the mpv622 is an optional accessory. If it's installed, you select the aux input by pressing the [SRC] button. Select the AUX/AUX1 display. Then press the [DISP] button for two seconds. The selected input blinks. Press the ? or ? to change the input setting.

Kenwood Car... | Answered 19 hours ago

Hi! I have a question about this. What sort of cord do I need for the aux? And where is it located on the radio? Thanks!

Kenwood... | Answered Yesterday you can try this site and follow the instruction this may help u

Kenwood Car... | Answered 3 days ago

there is no reset button, the reset is to disconnect power to the unit and see if it starts up ok, you do say problem but if it is loading problem then resetting it will not fix it.

Kenwood KDC-C719... | Answered on Jun 16, 2019

Hello Brian,
There is no reboot button on this unit. To reboot the receiver, simply unplug AC power for 30 minutes, then while plugging back in press and hold the power button for 5-10 seconds at the same time to reset.
Check all the speaker wiring for shorts, make sure they're also not touching the chassis of the receiver, or are not otherwise pinched or frayed. If all looks well, try disconnecting all the speakers and cycle the power off, then on again.
Try connecting the speakers one at a time until one of them shuts the Audio down. Check this speaker with a multi-meter and make sure it is reading between 4-8 ohms.
If not, the speaker may be blown and is causing the receiver to short out and therefore power the audio down.
If you still cannot get any audio through the system, then it likely has bad output transistors, or capacitor and is in need of service.
Here is a link to the Operating Manual Good Luck, JP

Kenwood Car... | Answered on Jun 16, 2019

Hello Francesco, I sent you the link to the service manual of your Kenwood XD-500, so that you follow the steps to get to the CD changer
I hope the information is usefull
Greetings Franco Dosil

Hola Francesco, te env?o el link del manual de servicio de tu Kenwood XD-500, para que sigas los pasos para llegar al cambiador de CD
espero te sirva la informacion
Saludos Franco Dosil

Kenwood Car... | Answered on Jun 15, 2019

dealer with vin or vehicle and proof of ownership

Kenwood Car... | Answered on Jun 13, 2019

Your Kenwood senses battery replacement as battery theft and forces you to re-enter the appropriate code to get back in operation.

Kenwood Car... | Answered on Jun 06, 2019

What button should I push if I don't have an "auto" button, both on the remote or the head unit? I have a dNx-5140. All help would be appreciated.

Kenwood... | Answered on Jun 04, 2019

Actually serial number you can find on gadget body or on gadget papers.

Kenwood Car... | Answered on Jun 03, 2019

I need help on a 1999 Nissan maxima, I have the same radio

Kenwood Car... | Answered on May 26, 2019

Not finding what you are looking for?
Kenwood Logo

9,541 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers


Level 3 Expert

85020 Answers

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides