Konka Televison & Video - Recent Questions, Troubleshooting & Support

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Konka Televison... | Answered on Jul 15, 2019

If you wish to get some details; visit the sites linked here. Pull up older posts.

Konka Televison... | Answered on Jul 05, 2019

Follow the screen setup instructions. Make certain the TV aerial is connected or you will not pick up any stations.

Konka Televison... | Answered on Dec 30, 2018

You can try these codes 2211 or 3308 if they do not work you will need to reset the unit. You will need to unplug it for 45 minutes that will reset the TV to factory settings. Then the pass codes I provided should work.

Konka K2386U 23"... | Answered on Dec 08, 2018

Not finding what you are looking for?
Konka Logo

549 questions posted

Ask a Question

Usually answered in minutes!

Top Konka Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers


Level 3 Expert

13434 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Konka Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides