Lexmark X - Recent Questions, Troubleshooting & Support

this error is saying that it doesnt rcognize one or both of the inck cartridges being installed turn the machine off wait a couple of minute turn it back on if stll not cleared. pull out the ink cartridges and reinstall them then power the unit on. if problem persists replace cartridges

Lexmark X5150... | Answered on Feb 27, 2019

Hi. The error tells you that your print cartridge has shorted. Here's a link to the Lexmark website to give some instructions on how to remedy the problem. Just click on this link: http://bit.ly/aSWvpk . Good luck!

Lexmark X6170... | Answered on Feb 27, 2019

Google search showed this free manual page.


Service PC

Outputs of the sensor (Y ATC) are not in the
specified range.
This error must be reset inside diagnostic mode
before troubleshooting or machine operation can

Go to
"925.00 Sensor (Y ATC) error" on

Google search result:





Service PC cartridge Sensor (Y ATC)


1 Reset the Y ATC failure lock out condition. 1. Enter diagnostic mode 2. Select Dev unit reset. 2. Select Y channel Perform a very large print test. Does the error continue? Go to step 2. Problem solved. 2 Check the sensor (Y ATC) for proper connection. Is the above component properly connected? Replace the Y developer unit assembly. Go to "Developer unit assembly removal". Replace the connection. 3 Perform a very large print test. Does the error continue? Replace the upper printer engine card assembly. Go to "Upper printer engine card assembly removal". Problem solved.

Lexmark X945E... | Answered on Feb 09, 2019

Try the Uk download site here it should still work;- http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=227:5:0:358:0:0&emeaframe=&target=http://downloads.lexmark.com/cgi-perl/downloads.cgi&target=http://downloads.lexmark.com/cgi-perl/downloads.cgi&&req=:::::

Lexmark X75... | Answered on Jan 19, 2019

typically faxing doesn't work on VOIP. i tried many times and sometimes it would go through although it said it didn't. other times it didn't work at all. VOIP has a limited bandwidth and the fax needs to send more info over the line than VOIP makes room for.

to have the best luck, stop all downloads and other network traffic while attempting to fax, so that there are no other programs or devices using the internet. the fax will have its best chance of working that way, although it probably still won't

here are some very good tips as well:

Lexmark X4270... | Answered on Dec 28, 2018


Quoting from support.lexmark.com above:


Error: "936 Main Drive Motor"; Error: "936 Transport Motor"; Error: "937 Main Drive Motor"; Error: "937 Transport Motor"


The 936 and 937 error codes indicate that the printer thinks there is a problem with the main drive motor.


  1. If your printer is posting one of these errors, turn it off and let it sit powered off for at least a minute.
  2. While the printer is off, open all of the doors and covers on the printer. Also remove the toner cartridge. Make sure there is no paper jammed in the printer. Pay close attention to the area where the toner cartridge sits. The main motor is located just to the left of the toner cartridge.
  3. If nothing appears to be wrong with the inside of the printer, reinstall the toner cartridge and close all the doors and covers. Now power the printer back on. If the error does not return, try printing again.
  4. If the error does not return when you print, continue using the printer. If the error does not return after a few days, this may have been an isolated incident and the printer should be fine.

Lexmark X342n... | Answered on Dec 13, 2018

How To Solve Scanning Problem in Lexmark Printer 1800383368 Support Number Australia?
If you face any problem with Lexmark printer then Call Lexmark Printer Support Australia on 1-800-383-368.
Everyone Need Printer Support in Lexmark. We are providing Technical Support to the Printer Users. Through Help Desk Australia Contact Numbers.
How to Contact Lexmark Printer Customer Service Australia?
1. Faults in Paper trays
2. Wired and Wireless printer problems
3. Driver Installation Problem
4. Cartridge Error
5. Ink Troubleshoot
If you have any Problem in Lexmark Printer then Call Lexmark Printer Support Australia. We have Expert teams which give services to the Customers. If You Need Any Technical Help then Visit Our Website or Call Lexmark Printer Support Australia.
Lexmark Printer Customer Service Australia
Website- https://www.helpdeskaustralia.com/lexmark-printer-support.html

lexmark printer new-pkpebuy3is2j53obe5gyfta1-4-0.jpg

Lexmark X4550... | Answered on Nov 29, 2018

Don't know for sure, but I found some user manuals on amazon, which can be helpful... take a look here: Amazon com lexmark manual I hope this helped you. Have a nice day

Lexmark X5650... | Answered on Nov 20, 2018

Please visit the Lexmark website, www.lexmark.com Support or Driver and Downloads.

Search by using the printer model and operating system that you need the driver for.

If you do not see a driver for the printer, then more than likely Lexmark has made a decision that the technology in the printer no longer matches up with the current demands of both software and hardware.


Lexmark X4250... | Answered on Nov 13, 2018

Here is the link to the exact manual you need:


Lexmark X2650... | Answered on Oct 11, 2018

You should call on ((+1-800-585-2494 )) Toll Free Lexmark and get help for Lexmark.

Lexmark X5470... | Answered on Oct 10, 2018

Usually you need to access the embedded web server on the printer by typing the IP address of the printer into your web browser address bar. This will open a window that will have all the settings available.

Lexmark X Office... | Answered on Oct 04, 2018

To download the manual for Lexmark X4270, please click the link below:

Lexmark X4270 Manual

Thank you

Lexmark X4270... | Answered on Oct 04, 2018

Here is the link to Lexmark's website for this printer.



Lexmark X4270... | Answered on Sep 24, 2018

Lexmark Printer Problems ' FixYourOwnPrinter

My printer Z12 Color Jetprinter is printing triple letters (printing on top of each other). ..... I have a Lexmark All-In-One X5150---It says "color cartridge missing" butthe ... We removed the ink cartridge and looked on the back of it and realised that .....to the right side of the computer ..if someone can tell me whats wrong or how ...

Lexmark Reset ink cartridge ' FixYourOwnPrinter

Jun 3, 2009 - Does any one know how I can reset my ink levels in the Lexmark All inone ... The best way to reset any lexmark inkjet is to buy a real printer. ... fool the empty ink cartridge signal on the Lexmark but putting a piece of "that never ..... So sure the printer prints but is it just using up the color cartridge to make the ...

[PDF]5000 Series User's Guide - Lexmark

Lexmark X5070... | Answered on Sep 20, 2018

Which versions do you want?
ISIS Twain Driver ver1.1 1.2 1.3 1.7 1.8 1.9 2.3 2.5 etc

Some support Win8 others do not

Lexmark X2650... | Answered on Sep 17, 2018

Not finding what you are looking for?

-4,176 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Cindy Wells

Level 3 Expert

5795 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Lexmark Office Equipment & Supplies

  • Forum

View Most Popular

  • Lexmark Office Equipment & Supplies