Magnavox Televison & Video - Recent Questions, Troubleshooting & Support

Main Board bad. The part number is A91F3-MPW S. Change this board fix the problem.

Magnavox... | Answered 3 days ago

replace the batteries in the remote, then push a button next to an FM radio, you may hear a buzz, that tells you the remote is working,this test doesn't always work,by the way. Next, turn the TV off & unplug for 10 min

Magnavox... | Answered on Oct 12, 2019
Try to download the user manual to your set by the above link. It has all details you want to know.
. If you wish to get some details; check the site linked here. Pull up older posts.

Magnavox... | Answered on Oct 06, 2019

My unit was dead also.....So I checked outlet first...It was good....Then I tried the 10 minute disconnect and reconnected unit......Saw Unit had power on LCD screen....Hit ON button on remote after changing to HDD and unit works perfectly again....That fix saved me 75 bucks for repair center to do same thing...Glad Funai makes units that shut off before damage occurs...Unit just needed to cool down hard drive or circuitry before it sensed it was ok again....When plugged in it is still technically powered even tho you dont see it on the LCD screen of the unit...

Magnavox... | Answered on Sep 30, 2019

I'm afraid it might be dead. Often, either the outage or the power coming back on can result in a spike in the AC power coming out of your outlets. If you have vulnerable electronics - like your TV - plugged in when this happens they can be damaged. It might just be a blown fuse in the power supply and a not-expensive repair. But it might be worse. Still, it is worth having someone look at it. And you might want to consider suing surge protected power strips for electronics like you TV.

Magnavox... | Answered on Sep 24, 2019

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
If blinks continue without any pause, or the LED light stationery; the main board is faulty.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. See the site by a desktop. Mobile view has no search box. If you are viewing it by your mobile, see it in webview

Magnavox... | Answered on Sep 17, 2019

Could be an open internal fuse or power supply failure. Try using the POWER switch if the TV has one.

Magnavox... | Answered on Sep 15, 2019

Request the schematic diagram directly from Magnavox.

Magnavox... | Answered on Sep 12, 2019

Probably the buttons contacts inside get "rusted" and stays in ON. Remove power plug. Try to open the front cover, remove pcb and clean all the buttons with contact cleaner, pressing them multiple times to get clean inside. Repeat this procedure 2-3 times. Dry all with a cloth and try testing. If not successful, repeat procedure or change the buttons. Good luck.

Magnavox... | Answered on Aug 15, 2019

The code is, 51563 or 53339
Directv and RCA are the same co.

Magnavox... | Answered on Aug 10, 2019

Not finding what you are looking for?
Magnavox Logo

2,110 questions posted

Ask a Question

Usually answered in minutes!

Top Magnavox Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers


Level 3 Expert

512 Answers

Tom Chichester

Level 3 Expert

54189 Answers

Are you a Magnavox Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides