Olevia Televison & Video - Recent Questions, Troubleshooting & Support


check input or source then make sure you have a HD antenna then select tv air and channel search

Olevia Televison... | Answered 3 days ago


That sounds very much like a failed electrolytic capacitor in the power supply board. It's easy to spot; the top of the capacitor is bulged up and may be leaking material. Usually, there is more than one bad capacitor. See the attached photo - two of the three capacitors shown are bad.
https://s17-us2.ixquick.com/cgi-bin/serveimage?

To get replacements, you need the following information: Capacitance, printed on the capacitor label (e. g., 2200 uF where the u is actually the Greek letter mu and stands for micro-; this would mean 2200 microFarads),
Maximum Voltage, printed on the capacitor. The replacement may have a higher voltage rating, but not lower.
Maximum temperature, printed on the capacitor. The replacement may have a higher temperature rating, but not lower.
Diameter of the capacitor in millimeters. The replacement may have a smaller diameter, but smaller diameter capacitors may not meet ripple current or endurance specs (described later). There may not be enough space on the board at that location for larger diameters.
Length of capacitor in millimeters. If it is too long, you won't be able to fit the cover back on without damaging something.
Endurance: at least 6000 hours at maximum temperature. For 10 mm diameter capacitors or larger, you should be able to find 10,000 hour parts.
Ripple current: You want the maximum ripple current rating available consistent with the other specs, otherwise the new capacitor may burn out prematurely. Higher voltage capacitors often have a greater ripple current rating, and physically larger capacitors likewise.

I have had excellent result with Panasonic FR series capacitors. They are much better than the Chinese off-brands usually installed in LCD TVs. When you install the replacement capacitor, make sure the polarity band goes in the same way as the original (the board is probably marked to show which way), and use lead-free electronic solder with an iron that gets hot enough for it. There are static-sensitive parts on the power supply board. Do not touch the circuit conductors with your fingers; handle the board by the edges only. Do not place the board with the wiring side down on any surface except an antistatic mat.

Olevia Televison... | Answered on Jul 17, 2019


Contact Olevia directly to inquire.

Olevia Televison... | Answered on Jun 13, 2019


Do a reset to this TV, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done./

Olevia Televison... | Answered on Mar 07, 2019


Contact Olevia directly to inquire.

Olevia Televison... | Answered on Mar 05, 2019


have you retried booting the hdmi cable by turning all products off remove hdmi cable then turn products on then re insert hdmi cable

Olevia LT37HVS... | Answered on Mar 02, 2019


Select antenna on input selection with remote. Scan for Digital Channels. Contact me for additional help "https://www.6ya.com/philip_b05beb373d913f26

Olevia Televison... | Answered on Feb 06, 2019


Please kindly see the attached picture , hope it will help
1_16_2019_6_49_30_am.png

Olevia Televison... | Answered on Jan 16, 2019


We cant find our original element remote control. I just tried 10178 on the direct tv remote control and it worked YEAH!!!! We just can't do the screen size edit thing with it :(. Might still have to order a replacement element remote. This works for now. Thanks.

Olevia LT32HVM... | Answered on Jan 12, 2019


try plugging in power 1st to the box ,then put cable in hdmi to tv after box is on,it may help

Olevia Televison... | Answered on Jan 03, 2019


Use code search to find something that works. If a search through all codes stored in the GE URC fails, you will have to try a different one. All URCs do not contain all possible code.

Olevia Televison... | Answered on Dec 22, 2018

Not finding what you are looking for?
Olevia Logo

2,316 questions posted

Ask a Question

Usually answered in minutes!

Top Olevia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you an Olevia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...