Recent Questions, Troubleshooting Help & Support - Page 3


this happened to me too. turns out the battery is dead and the key is turned on Accessory. the only solution is to replace the baterry witha charged one, charge the battery, or possibly jump start it. I charged mine and it solved the problem.

2003 GMC Envoy | Answered 1 hour ago


Maybe you are actually running out of fuel ,gas gauge is showing 1/4 of a tank when it is really almost empty . Would not have anything to do with the fuel filter , if it did it would happen when full also .

2002 GMC Envoy | Answered 1 hour ago


If you have checks, the routing number is the first set of numbers on the bottom left of the check. Also, you can look up on line, just type in " routing number for Bank, USA". Put in your bank name.

Computers &... | Answered 2 hours ago


THROW IT AWAY S T U P I D

Samsung Galaxy... | Answered 2 hours ago


there's a website reliable-store
all heavy equipment repair issues servicing, loading, wiring, engine problems everything is covered here its a must try

Cars & Trucks | Answered 2 hours ago


Money. He probably already spent a lot on the wedding itself, so you might as well give them something they can use in starting their new life together

Weddings | Answered 2 hours ago


The service and repair manual will help you step by step to locate and fix the problem on your own easily and you will get the manual from the given link https://toolsnyou.com

Cars & Trucks | Answered 2 hours ago


Contact your college and advise them.

Computers &... | Answered 2 hours ago


Maybe try this, it woks on Sagem that also produces xerox mfp...

Follow the keystrokes set out below, do not worry about what is on the display unless stated to check. All letters referred to are for the keys on the alpha key pad to the right of the control panel, under the plastic flap.

1st option: Press down arrow, *, #, ok, 1, ok, stop (red button),
Press down arrow, #, T.
The machine returns to the error code. Switch the machine off for 10 seconds, switch
back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, 0 (ZERO), ok, stop.

2nd option
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, #, look on the display, press up arrow until "T>>PRINTER" is
displayed. Press ok. The machine returns to the error code. Switch the machine off for 10
seconds, switch it back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
If this is a recurring problem the firmware on the board may need to be upgraded, or there
is a physical fault with the fuser unit. Low voltage / power surges in the supply power to
the machine may also play a part in the occurrence of the error.
The firmware needs to be version 1.10.

To check the firmware version do the following:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, *, W
Firmware version is displayed. Press stop to clear screen.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
5401:
Press down arrow, *, #, ok, 1, ok, stop
Press *
The trace lists will be printed, firmware version is after PRT, as in example below.
In this example, the printer firmware is: PRT V 1.5
It is older than V 1.10 and the printer firmware need to be upgraded.njk

Xerox Office... | Answered 2 hours ago


If there is no suitable driver on the manufacturers web site, that is the end.

Office Equipment... | Answered 2 hours ago


unable to guess what it is on

Cars & Trucks | Answered 2 hours ago

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...