Samsung Televison & Video - Recent Questions, Troubleshooting & Support


I found a video that hopefully will fix your PS4 problem "How to Fix:PS4 Controller Yellow Light Of *****".

Samsung PS42P2S... | Answered 4 hours ago


Hi Norman Malkin, to adjust the brightness of your Samsung TV, you must enter Menu, select Image, display a list where Contrast Brightness Color and other parameters appear, select Brightness and increase or decrease the brightness to your liking, you may need make Color and Contrast adjustments
I hope you can adjust it
Greetings Franco Dosil

Hola Norman Malkin, para ajustar el brillo de tu TV Samsung, debe entrar en Menu, selecciona Imagen, de desplegara un listado donde te aparece Contraste Brillo Color y otros parametros, selecciona Brillo e incremente o disminuye el Brill hasta tu gusto, puede que necesites hacer ajustes de Color y Contraste
Espero lo puedas ajustar
Saludos Franco Dosil

Samsung... | Answered Yesterday


Hi Dick Murawski, if you don't want to break anything on your Samsung TV, look for a specialized Samsung technical service
Greetings Franco Dosil

Hola Dick Murawski, si no quieres romper nada en tu TV Samsung, busca un servicio tecnico especializado de Samsung
Saludos Franco Dosil

Samsung... | Answered Yesterday


Hi Ramdatt Sookchan, I could have a problem with the LCD panel, try disconnecting one of the Flex tapes from the T-Con board to the LCD panel and see if half of the image appears, do the test by disconnecting one and then reconnecting and removing the other
If a screen appears in any of the tests, the problem is in the LCD panel
Try and comment
Greetings Franco Dosil

Hola Ramdatt Sookchan, podria tener un problema en el panel LCD, prueba desconectar una de las cintas Flex de la placa T-Con al panel LCD y f?jate si te aparece la mitad de la imagen, haz la prueba desconectando una y despues reconectando y sacando la otra
Si en alguna de las pruebas te aparece media pantalla, el problema esta en el panel LCD
Prueba y comenta
Saludos Franco Dosil

Samsung... | Answered 2 days ago


The hack for this 3D Blu Ray player is the same as for previous models.

1. Make sure NO disc or usb stick is inserted into the player.
2. Turn on your your blu ray player.
3. When the main menu appears, press the REPEAT button followed by the region code your player is currently locked to - depending on which country
you are in (eg: in Australia press "REPEAT 7 6 8 8 4".
4. In the top right corner you will see your region code flash (eg: 4 for Australia).
5. Press 9.
6. Turn off and on and your BD-E6500 is now region free.

How this differs from the opening post is no need to open and close the disc tray.


- - - - - - - - - - - - - - - - - - - -

So, after pressing REPEAT please enter one of the following codes the matches your current region lock:

1 - 2 9 3 3 4 (US)
2 - 5 7 5 3 8 (Europe)
3 - 5 6 7 3 2 (South East Asia)
4 - 7 6 8 8 4 (Australia / South America)
5 - 5 3 8 1 4 (India, Ukraine, Belarus, Russia, Africa)
6 - 2 4 4 6 2 (China)

9 - Region Free

Then press '9' and your player is region free.

Samsung... | Answered 2 days ago


You will only be able to do this if it is a smart TV

Samsung... | Answered 2 days ago


TYPE e -manual for Samsung UN40H5203 smart tv into your search box on the page that appears click the top one and when the Samsung page appears there is row of boxes click the bottom one [manual] and there's your manual .

Samsung... | Answered 3 days ago


It is more likely your color wheel especialy if Tv makes excesive noise.
Check this link:
Samsung Color Wheel
http://www.jangro.com/electronics/samsung-dlp-replace-color-wheel/

Samsung DLP... | Answered 3 days ago


Hello,

The LCD Screen can only be replaced. The link for this item is listed below.

Samsung LN-T3253H LCD Screen Replacement

Samsung... | Answered 3 days ago


Remove the rear cover and check the lamp cover switch. Earlier versions used a black plastic switch holder that may break due to improper assembly. The part number for the holder is BP61-01240A. Newer versions use a metal tab attached to the engine. In this case, improper assembly may cause the lamp cover switch to be extended past its range, either breaking the switch or causing it to have an open contact. Replace the switch with BP91-01231A.

Note that in these models, when reinstalling the rear cover, it is best to remove the lamp cover first, install the rear cover, then install the lamp cover. This will make sure that the lamp switch is properly engaged.

Samsung... | Answered 3 days ago


If you complain and be nice to them, they will reply but as it is out of warranty, they don't legally have to do anything.
Is your repair guy Samsung Authorised? If he isn't they may ignore what he says. Find an Authorised Samsung Repair Service and talk to them.

Samsung... | Answered on Oct 10, 2019


Hello! In this case, it can be two things either your lamp si goping out, or the ballast is. They're not that expensive http://www.discount-merchant.com/SAMSUNG-9137-008-22705-Lamp-Ballast-Driver-p/1138029.htm/?Click=48427 Of course you need to get the right part number. http://www.discount-merchant.com/Samsung-HLN5065W-OEM-Replacement-LAMP-BULB-p/samsung-hln5065w-lamp-oem.htm/?Click=48427 also for the lamp you need to get the right one you need.

Samsung... | Answered on Oct 10, 2019


Are you sure about the model number? I see a BD-EM57C blu-ray player from Samsung here: http://www.samsung.com/us/support/owners/product/BD-EM57C/ZA . Scroll down and expand the Manuals section; the user's manual is at the bottom of the list. You have to accept the Samsung terms of use for the manual. The direct link is currently: http://downloadcenter.samsung.com/content/UM/201407/20140721135645955/%5BBD-EM57,57C-ZA%5DAK68-02229C-05ENG-BM-0718.pdf .

I hope this helps.

Cindy Wells

Samsung... | Answered on Oct 10, 2019


Hello,

This model is covered under the Samsung class action settlement. Samsung has agreed to pay for parts and labor on a group of TVs that had bad power supply boards and your model is one of them. You will need to contact Samsung to have the repair done, this is free to you. You can get full details here:

http://www.ccl-la.com/blog/index.php/samsung-has-reached-a-settlement-in-class-action-lawsuit-over-faulty-tv-power-supplies/

Samsung... | Answered on Oct 10, 2019


contact the service center of SAMSUNG. They sure really have one,it's good if it's still under the warranty, or contact the other authorized repair shops for SAMSUNG and ask for their service.

Kindly rate this post and thenk you for choosing fixya.

Samsung... | Answered on Oct 10, 2019


If the Samsung TV is still under warranty contract them at - http://www.samsung.com/us/support/
If you want to repair it yourself - http://www.earthinfo.org/samsung-tv-makes-a-strange-clicking-sound/

Samsung... | Answered on Oct 10, 2019

Not finding what you are looking for?
Samsung Logo

Family Lines

41,175 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...