My PS3 will not update cause of error(80710736).
ok first get rid of the corrupt data that was downloaded then redownload if that dont work try a cat-5 cable its more stable and wireless can mess up connetions if that dont work you will halfto contact customer support they will tell you evry possible problem that can ocurr and they go down a list till you correct the problem
E:61:30 error message
this error is
"Reset position detect error when stepper iris is initialized"
Turn on the power and set to T (telephoto) end by rotating the
ZOOM manual ring. While observing the iris blades in the
lens, turn on the power again and check the iris blades in the
lens work properly. Inspect the iris drive motor of lens drive
block (Pin qh to ql of CN6602 on the VC-582 board), when
the iris does not operate. Inspect the iris reset sensor of lens
drive block (Pin qd to qg of CN6602 on the VC-582 board),
when the iris operate.
if you need more help you can download the factory service manual from the below link:
2 days ago
Not finding what you are looking for?