Sunbeam Food Mixers - Recent Questions, Troubleshooting & Support

fixya does not sell Sunbeam parts.

Sunbeam 2370... | Answered on Aug 23, 2019

Request an assembly diagram from Sunbeam, then follow it in reverse.

Sunbeam Food... | Answered on Aug 20, 2019

It's from the early 70's and willbe grouped with the MM model of mixers. Here is a manual from the next model after your's;

Sunbeam Food... | Answered on Jun 12, 2019

you may need a diagram for this. There may be a diode in line with current. If so, it functions as a circuit breaker to keep from damaging the motor. If no current goes thru diode but is at the "front", then replace diode. Also something made the diode malfunction, so you need to investigate. My money is on the motor. It is probably starting to ground out.

Sunbeam Food... | Answered on Jan 25, 2019

Check the power wire that plugs into the power supply for anything that doesn't look right. Something could be loose inside also but don't attempt to dissemble it and fix it unless you're confident in your skills, otherwise any electronics shop could diagnose and likely fix it for a small fee.
Please click "Helpful" if you found gbis helpful at all. Have A Great Day!

Sunbeam Food... | Answered on Jan 16, 2019

You can probably get them from here, but you have to order their minimum quantity -
They have self adhesive pads that you can replace the old feet with, and you will have a couple hundred left over for about 20 bucks.

Sunbeam Food... | Answered on Jan 05, 2019


Sunbeam Food... | Answered on Nov 28, 2018

Not finding what you are looking for?
Sunbeam Logo

540 questions posted

Ask a Question

Usually answered in minutes!

Top Sunbeam Food Mixers Experts

Vincent G
Vincent G

Level 3 Expert

2361 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Sunbeam Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides