Westinghouse Televison & Video - Recent Questions, Troubleshooting & Support

How do you know it has no power, did you test the wall plug?

Westinghouse... | Answered on Oct 08, 2019

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.

Westinghouse... | Answered on Oct 06, 2019

The applicable code would be in a compatible remote control, not your TV.

Westinghouse... | Answered on Sep 19, 2019

FOUND A SOLUTION! (at least in my case) thanks to some creative Google searching...

Apparently the HDMI ports can get into a state where they are unable to negotiate the input signal properly. The way to "clear" the ports and allow the HDMI signal to be detected is to perform a "reset" on the unit.

Just turn the set off using the power button on the right side of the unit. Then, press and HOLD the power button for at least 10 seconds, then release.

The set should turn on and essentially do a "reboot" where it displays the Westinghouse logo. After that your HDMI ports should be functional again.

It worked for me :-) Best of luck..

Westinghouse... | Answered on Sep 13, 2019

May be a capacitor on the board going bad.

Westinghouse... | Answered on Sep 11, 2019

Hi Matt Ray, the LED driver is on the same Power Supply board
Regards Franco Dosil

Hola Matt Ray, el controlador de LEDs esta en la misma placa de Fuente de Alimentacion
Saludos Franco Dosil

Westinghouse... | Answered on Sep 10, 2019

Westinghouse is known for using 999999 as the factory password

Westinghouse... | Answered on Sep 05, 2019

Go to Wal Mart and buy a programmable remote. That way you can also add DVD, blueray player all on the same remote.

Westinghouse... | Answered on Aug 14, 2019

You can download it from this site: zbehzgjm.ml/ohoc.html

Westinghouse... | Answered on Jul 13, 2019

Necesito codigo de acceso a canales TV westinghouse.
Modelo VR-3730
Serie: 6561V14301725

Westinghouse... | Answered on Jul 08, 2019

Speaker is likely blown. It is replaceable, but you can just go to walmart or where your favorite store is and purchase a soundbar. Bluetooth or hard wired, and not worry about the tv speaker. Sound will be much better, abd you can do yourself in a matter of minutes.

Westinghouse... | Answered on Jun 30, 2019

Not finding what you are looking for?
Westinghouse Logo

3,803 questions posted

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides