20 Most Recent Yamaha 2007 Grizzly 700 FI Auto 4x4 Exporing Edition Questions & Answers

The primary circuit has a ground connection so everything works... your secondary circuit doesn't have a solid ground. Go over all your ground connections carefully.

hi,anything i need quad related i go here www Quad Forum co uk Index page

Check your fuel cap - fast! Those caps are meant to vent the pressure that builds. Different mechanisms - a lot of Yamaha caps you can hear something rattling around in that cap if you shake it by your head. Take the cap off - I am not recommending you start your ride without a gas cap on - but any other cap or a way to properly and safely do it - get rid of that cap and see if you can run it without any issues. All The Best, Justin Lee, 17 South Industries, LLC

Does your model use hydraulic brakes? Many models don't. Check your manual and if you don't have one, go to the mfr's web site and download one. Otherwise, try it out. If the brakes seem to be working fine... why fix it, if it ain't broke! If the brakes, don't feel right, then you will have to bleed hydraulic lines and slowly top up with the proper viscosity and thermal property brake fluid. If there are problems getting brake pad pressure after filling the master cylinder and bleeding the brakes, the master cylinder will need replacing.

the belt housing is filled with water. open the drain valve on bottom of housing, drain and let dry for 24 hours. Once the moisture is all gone the belt will stop slipping.

you swamped your tranny. full of water i bet and poss burnt it up.. If you need further help, reach me via phone at https://www.6ya.com/expert/allen_b068623c5003aa4b

Hey Anon, this is NOT something to "try and learn" how to do..find a professional that is will to tutor you when you do this for the first time! It COULD save you A LOT of $$$$!!!!!

If you have good spark then it's most likely a fuel issue, anything off of idle is dealing with the main jet and metering needle, clean jet and check needle for excessive wear.

Check the fuel flow through the tank valve. There are screens inside the tank that may be blocked and restricting flow.

.004 intake .005 ext

must hold brake, use the foot brake!