Polaris 2005 Sportsman 700 Twin - Answered Questions & Fixed issues
I have a noise and skipping feeling when coming right off idle it feels and sounds like the rear diff i changed rear diff new axles and bearings new u joints took trans apart and inspected its fine.
There's
this website
www.reliable-store.com
They have books on ALL vehicles.
it covers wiring diagrams, electrical diagrams,
fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, owner's/service/repair/parts/maintenance manuals etc everything totally..
I have 1987 toyota 4runner model and I keep servicing and when needed repair it on my own. worth it !!!
3/18/2018 5:32:38 PM •
Polaris 2005...
•
Answered
on Mar 18, 2018
•
128 views
2001 500 HO is stuck in High Forward gear
If the shocks are worn out, get off the machine and lift up on the back rack. This takes up the slop between the shifter box and the transmission, and usually allows me to shift. I also had an issue with the thin steel plate behind the shifter box. Got a crack in the top , so it was flexing, creating more slop. Welded it shut, good as new.
3/17/2015 12:50:04 AM •
Polaris ATVs
•
Answered
on Mar 17, 2015
•
789 views
Exhaust
what?? it just bolts on??
6/22/2014 9:11:43 PM •
Polaris ATVs
•
Answered
on Jun 22, 2014
•
258 views
Assembly diagram for a recoil on a 1999 Polaris 400 xplorer
Assembling a recoil system on a Polaris 400 Xplorer involves several steps. While I can't provide an actual diagram here, I can outline the general steps involved in assembling a recoil system:
- Preparation: Ensure you have all the necessary parts for the recoil assembly including the recoil starter, recoil housing, recoil spring, and any other associated parts.
- Mounting the Recoil Housing: Begin by mounting the recoil housing onto the engine. It typically bolts onto the engine casing.
- Inserting the Recoil Starter: Place the recoil starter mechanism into the recoil housing. It usually fits into grooves or mounts within the housing.
- Attaching the Recoil Spring: Connect one end of the recoil spring to the recoil starter mechanism and the other end to a fixed point within the recoil housing. This provides the tension necessary for the recoil starter to function properly.
- Installing the Pull Cord: Thread the pull cord through the hole in the recoil starter mechanism and tie a knot at the end to secure it. Wind the pull cord around the recoil starter as per the manufacturer's instructions.
- Testing: Before completely sealing the recoil housing, give the recoil starter a few pulls to ensure it functions smoothly and retracts properly.
- Final Assembly: Once you're satisfied with the recoil assembly, bolt down any remaining covers or components to secure the recoil system in place.
Always consult the specific service manual for your Polaris 400 Xplorer for detailed instructions and diagrams tailored to your exact model. Additionally, if you're unsure about any step, it's best to seek assistance from a professional mechanic or someone experienced with small engine repair.
4/20/2024 12:13:30 PM •
ATVs
•
Answered
3 days ago
•
147 views
Can't find how to trouble shot the horn on my 2015 Kawasaki mule
take off the horn unit power it direct if it works its ok, if not replace, next step wire a small bulb into the horn wires and press the button if it lights the switch is ok, if you have a circuit tester put one end on the battery ground and check for power in the horn wires if their is power there put the lead on battery positive and press the horn button if there is no power their the switch or wiring is faulty
4/16/2024 10:19:40 PM •
ATVs
•
Answered
on Apr 16, 2024
•
149 views
Not finding what you are looking for?