20 Most Recent Polaris 2005 Trail Blazer 250 Questions & Answers

Have you checked the Crankcase seals? I have 2 Big Bosses with 250's. 1989 + 1992 Both were terrible at starting and idling....after much troubleshooting I finally changed the crankshaft seals. (Which btw looked fine from the outside!) machines can be Cold now and will start 2 or 3rd pull with the cord now. Idle perfectly. Also the oil injection system stopped working intermittently. Machine would just quit.....crank and crank it forever. So I just started using 32/1 mix and unhooked the Oil Injection cable from the Throttle.

If the shocks are worn out, get off the machine and lift up on the back rack. This takes up the slop between the shifter box and the transmission, and usually allows me to shift. I also had an issue with the thin steel plate behind the shifter box. Got a crack in the top , so it was flexing, creating more slop. Welded it shut, good as new.

isnt that a 2 stroke? go to polaris for an owners manual

Sounds like a bad regulator.

what?? it just bolts on??

don't worry about it if everything works properly!

interesting problem

take off the horn unit power it direct if it works its ok, if not replace, next step wire a small bulb into the horn wires and press the button if it lights the switch is ok, if you have a circuit tester put one end on the battery ground and check for power in the horn wires if their is power there put the lead on battery positive and press the horn button if there is no power their the switch or wiring is faulty

Question edited for clarity, correct order and add maker. Question moved from Cars and Trucks to model category. Service manual https://www.manualslib.com/products/Suzuki-Kingquad-5901790.html ..

https://www.motosport.com/atv/oem-parts/suzuki/2004/eiger-400-4x4-auto/wiring-harness