Polaris 2012 Ranger RZR 570 - Answered Questions & Fixed issues
How to set set timing polaris 570 rzr?
pull the sensor out on
flywheel side turn the engine till the v lines up with that hole set all 4 lines on cam sprockets straight across with i and e up and the lobes facing away from each other
Ignition timing is done by the ECU and can't be adjusted;
camshaft and balance shaft timing done during engine build-up
6/5/2014 6:41:49 AM •
Polaris 2012...
•
Answered
on Jun 05, 2014
•
4,421 views
2001 500 HO is stuck in High Forward gear
If the shocks are worn out, get off the machine and lift up on the back rack. This takes up the slop between the shifter box and the transmission, and usually allows me to shift. I also had an issue with the thin steel plate behind the shifter box. Got a crack in the top , so it was flexing, creating more slop. Welded it shut, good as new.
3/17/2015 12:50:04 AM •
Polaris ATVs
•
Answered
on Mar 17, 2015
•
789 views
Exhaust
what?? it just bolts on??
6/22/2014 9:11:43 PM •
Polaris ATVs
•
Answered
on Jun 22, 2014
•
258 views
Can't find how to trouble shot the horn on my 2015 Kawasaki mule
take off the horn unit power it direct if it works its ok, if not replace, next step wire a small bulb into the horn wires and press the button if it lights the switch is ok, if you have a circuit tester put one end on the battery ground and check for power in the horn wires if their is power there put the lead on battery positive and press the horn button if there is no power their the switch or wiring is faulty
4/16/2024 10:19:40 PM •
ATVs
•
Answered
2 days ago
•
149 views
Not finding what you are looking for?