Polaris Ranger 500 EFI - Popular Questions, Answers, Tips & Manuals
How do you replace a front ball joint on a 2011 polaris ranger 500
like doing an auto --jack up vehicle remove wheel rotor and brakes to access the ball joint --they are pressed in --remove lock bolt separate from spindle remove locking c- clip and either buy borrow or rent a ball joint press and remove ball joint replace is in reverse
Shut machine off then go to restart and it wont fire
if thats all the info you have you need to take it to the dealer.
those have way to many possible problems.
1. bad spark plug seal, dirt fills up the entire spark plug hole especially sand.
2. they have fuel pump pressure issues due to poorly constructed fuel pressure regulators.
3. fuel pump itself
4. if intake or exhaust is modified it may overheat after it shuts off (engines get much hotter after they are shut down) will not start if too hot
5. one of the three ignition coil might be failing
6. CDI may have failed
7. Spark plug might be hot fowled.
Not finding what you are looking for?