Suzuki ATVs - Popular Questions, Answers, Tips & Manuals


Sounds like the nuetral detect switch is bad or the wiring to it is cut. This sensor is on the transmission hub.

Suzuki 2005... | 81 views | 0 helpful votes


How to change a candle on a 2004 Suzuki eiger

HAHA, the problems of using Google Translate, or not writing in ENGLISH to an English speaking, North American Forum ;>)

I wonder if you mean a bulb?

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&ei=mPEkXZ-4KdCktQajzbaYBQ&q=2004+suzuki+eiger+replace+bulbs

Suzuki 2004... | 70 views | 0 helpful votes


Still sounds like the pilot system in the carb is not clean... these are TINY passages.. several of them too! .. some hidden by blind plugs that have to be removed to properly clean the carb!!! If you are not sure how to do this.. take it to a professional!!!!

Suzuki 2005... | 95 views | 0 helpful votes


Here is a forum that discusses the need to replace or not the bolts because of stretching and also gives the torque for the bolts.

http://forum.highlifter.com/700H1-head-bolts-Specs-m4583146.aspx

Suzuki 2007... | 171 views | 0 helpful votes


It could be just condensation which is normal. Once the motor heats the baffles in the muffler it will go away. If you notice a smell of raw gas...the fuel float could be stuck and leaking. If that is the case you will certainly smell it. If no gas odor is present, you should be fine.

Suzuki 2005... | 101 views | 0 helpful votes


CHECK SOLENOID AND STARTER PERHAPS EVEN THE FUSES AND KILL SWITCH

Suzuki 2006... | 151 views | 0 helpful votes


depends on what year and model, it would be about 50hp or 36kw
that would be max rated, it will drop from there depending on age, mechanial condition, temperature, altitude, grade of petrol etc

Suzuki 2005... | 93 views | 0 helpful votes


you have a pinched wire someplace in your wire harness. maybe a melted spot also could cause this.hot wire shorting out to ground on frame. anything you had loose lately. under gas tank , wires got against exhaust pipe, wires rubbed bare from wear ? broken wire in harness could cause it.

Suzuki 2005... | 170 views | 0 helpful votes


I used to have one of the Suzuki quads if I remember right you have to rotate the rear axle forward to loosen and backward to tighten

Suzuki 2005... | 69 views | 0 helpful votes


How long does it run before you get bubbles? Sounds like the line is too close to something hot enough to boil the fuel, what mechanics call "vapor lock" Reroute the line or insulate it.

Suzuki 2005... | 70 views | 1 helpful votes


Order the maintenance manual directly from VTT.

Suzuki 2005... | 53 views | 0 helpful votes


Well its a pump their isn't really a vacuum their is pressure do to v.o.c's but not enough to push fuel to the engine it needs to be pumped out at about 60 p.s.i

Suzuki 2005... | 79 views | 1 helpful votes


google your model for schematic and locations

Suzuki 2004... | 252 views | 0 helpful votes

Not finding what you are looking for?
Suzuki Logo

394 questions posted

Ask a Question

Usually answered in minutes!

Top Suzuki ATVs Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

 Scott Tx
Scott Tx

Level 2 Expert

604 Answers

Are you a Suzuki ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...