1997 kawasaki prairie 400 4x4 automatic

Cdi box get wet ?

No, unfortunately sorry.

may be neutral safety switch. Found this service manual PAGE 352 which may help
https://www.manualslib.com/manual/808635/Kawasaki-Prairie-360.html?page=352#manual

wiring diagram for a 2000 kawasaki Anon, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
kawasaki prairie 300 wiring diagram Google Search

Check your starter solenoid. You can trace it by following the power wire from the battery to the small solenoid block that contains a 30 amp fuse. You can bridge the posts on the solenoid by using needle nose pliers or whatever else you may have. If it starts up or you hear the starter run, you have a bad starter solenoid.

Prairie 360 revs high but goes slow (45mph) - Kawasaki ATV Forum

www.kawieriders.com > ... > Kawasaki Brute Force/Prairie/Bayou
Oct 27, 2008 - 2006 Prairie 360, wife's ride, polar white, with 26" Swamp Lites on SS108's. ... that it has a low top-speed...45mph is about as fast as they seem to go. ....air cooled motor theres no real performance there, the P360 wts are light ... Can't put 2005 Kawasaki KVF 360 into gear
Jun 30, 2013
Prairie 360 speed/power issue?
Aug 28, 2012
06 Prairie 360, too many rpms???
Nov 30, 2011
2004 Prairie 360: WOT miss
Nov 9, 2011
More results from www.kawieriders.com

Honda FourTrax & Kawasaki Prairie 650 ' Outdoor Life

www.outdoorlife.com/articles/gear/.../honda-fourtrax-kawasaki-prairie-6...
Honda decided not only to get into the 500cc-class automatic 4x4 camp, but to do ...by three electronic shifting programs: one for high-speed driving on easy trails; ... this innovation: Kawasaki made the Prairie 650 capable of starting in gear.

My brother had the same problem on his prairie 400. He was getting water in the electrical connector for his CDI unit. Unplug all of the electrical connectors one at a time and make sure they are dry. Apply dielectric grease to all the connections and plug them back in. I recommend doing this one at a time so you don't mix them up or forget where they go.

Kawasaki mule 610 new battery but little to no power to solenoid. Fully charged starter makes rapid clicking noise. When attacked to battery jump starter it will start. Mule was running excellent for 2 weeks with new battery. I was told by kawasaki technician it was ignition. Nope thoroughly skimmed inspected wires and see nothing wrong. Technician told me different second time, it's now the starter replaced starter ($450) and still no results I'm at a loss

Faulty starter solenoid or relay possibly