At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I have replaced a clutch on a Honda 350 four trax atv...
How Much oil did you put back in the engine?..did you remove the oil filter..??..did you install it back in correctly(they go in ONE way!!). .the engine oil capacity is 2.1 quarts..NO MORE!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The front break usually over rides the starter sensors. Squeeze it and try starting . You can try rocking the machine forward and backward while trying to get it into neutral.
Your 4 wheel drive may be working, but it is a torque-sensing front
differential for reduced steering effort, that supposedly sends power to the wheel with the most traction. Many owners have found that just the opposite is true. Your problem may mean that the differential is working, but because it doesn't lock up both tires in the front and only one tire is getting all the traction you can't see it work as advertised. The link to the video is great for showing what may be happening. The front differential may be worn out and need to be fixed or it may just be that it is not working as you expected: https://www.youtube.com/watch?v=KF-iD4pmmoA
Hi, if there is smoke 10-20 minutes that is fine, probably just residual oil from the top engine work.
if the smoke is a hour coming off the engine because of external oil leak, sounds like head gasket is leaking. If you continue to run the machine like this, make sure to always check oil levels and add oil when low. As long as your smoke is not coming out the tail pipe which would mean you are burning oil and would need to be fixed.
side note: Its always good to have a Haynes manual for any machine you own, they have great troubleshooting tips.
Sometimes you need to adjust your clutch cable. as the disks wear out you have to tighten it to get it to disengage. if the cable is adjusted too tight then it will slip because it is not taking all the pressure off the disks so they can fully grab. That is where i would start
×