I have a klf 220A 1998 atv.the ignition switch only has 2wires but the manual is showing 4 wires should I get one with 4wires

Can
an
y
help me with this brand quad any manuals or info I need plastics and seat ect 110cc

For every ATV ever made in the history of ATVs?

Google

year make model ignition wiring diagram

and look at the images tab. You might also get a free Service Manual like this.

https://www.google.com/search?q=2008+Kawasaki+Brute+750+ignition+wiring+diagram

..

Is that ac or dc volts? You should be checking for ac volts.

Try google image make model year they have wiring schematics for everything. Good luck

If your HS400ATV is not powering up even with a fully charged battery and you've already replaced the ignition switch, there may indeed be another module or component that could be causing the issue. Here are a few possibilities to consider:
1. Main Fuse: Check the main fuse for the ATV. It is typically located near the battery or within the fuse box. Ensure that the fuse is not blown and is making proper contact. A blown main fuse can prevent power from reaching the ignition switch and other electrical components.
2. Starter Solenoid: The starter solenoid is responsible for engaging the starter motor when you turn the ignition key. If the solenoid is faulty or not functioning correctly, it can prevent the ATV from powering up. Inspect the solenoid for any signs of damage or loose connections. Consider testing the solenoid or replacing it if necessary.
3. Kill Switch/Safety Interlock: Check if there is a kill switch or safety interlock feature on your ATV. These safety mechanisms are designed to prevent the ATV from starting under certain conditions, such as when the brakes are not engaged or if the ATV is not in neutral. Make sure these switches are in the correct position and functioning properly.
4. Wiring and Connectors: Inspect the wiring harness and connectors for any loose, damaged, or corroded connections. Pay close attention to the connections between the battery, ignition switch, and any other modules or components. Clean and tighten any loose connections, and repair or replace any damaged wiring or connectors.
5. Electronic Control Module (ECM): The ECM or other control modules could be a potential source of the issue. These modules control various electrical functions in the ATV. However, diagnosing and testing these modules often requires specialized tools and knowledge. It may be best to consult a professional ATV mechanic or an authorized dealer who can properly diagnose and test the modules if needed.
If you've checked these possibilities and the issue still persists, it is recommended to seek professional assistance. They will have the expertise and equipment necessary to diagnose and resolve electrical issues specific to your HS400ATV.

Hey Steven,
get your self one of these..it will have a wiring diagram..and a lot more information that will be helpful!!

Yamaha ATV repair manuals
Yamaha atv manuals

You need a special puller. See a daler,thier cheap.

Modual probably gone

this should help you for all wiring and trouble shooting

HONDA SERVICE MANUAL DOWNLOADS: http://www.hondaatvforums.net/forums...all-years.html
**When you go to the above link, scroll down and select the Honda ATV model that you are interested in. Then, the password to download the service manual is: hondaatvforums

go to ebay and find a new switch, it'll come with a new key and should plug into a wiring harness.