I have a 2004 Yamaha Warrior ATV I was given disassembled put the carborator I purchased there two lines and a port, need to find out where the line go

SOURCE: 2001 yamaha warrior valve adjustment

hello
with the cylinder set at top dead center compression. using a feeler gauge between the tappets and the valves there should be .002-.003in clearance on the intake valves, and .006-.007in. clearance on the exhaust valves. thank you.

SOURCE: im rebuilding my warrior

if your using the old bolts, 35 ft/lbs. if new bolts, 25 ft/lbs. that will work just fine.

SOURCE: i have yamaha warrior but no key soo i want to

you can have the ignition switch replaced. have a dealer get you an OEM

http://rswarrior.com/forums/t/25090.aspx

http://www.brenhamyamaha.com/yamaha_star.html

a look at the newest road star

http://www.totalmotorcycle.com/photos/2010models/2010-Yamaha-RoadStarS.htm

SOURCE: will 1989 yamaha 350 warrior cdi box match up with

i have a 89 350 warrior and i was wondering if i could adapt a 90 style cdi box to my 89

SOURCE: 2004 Yamaha RX Warrior sled backfires when letting off throttle,WHY?

It sounds like a timing problem.