SOURCE: sliping clutch
Plenty of slack in cable and clutch arm at case?Requires side cover removal and it is easy. Important to put proper oil back in engine. Wet clutches don't loke motor oil
SOURCE: no key for our kawasaki bayou 220
On the Bayou 220 you have 2 wires from the Ignition Switch. If I was you I would wire them 2 to a toogle switch or push bottom start.
SOURCE: can you adjust clutch to stop sliping on 2000 v
Your clutch cable should have about 1/4 inch free play measred at the lever, check this by pulling the clutch lever slightly, look between the perch and lever, should have a small gap before it puts tension on the lever, if you adjust this and it still slips, it's problably shot, best bet is to ebay a good barnett clutch kit (under $200) and a cover gasket (prob 20 bucks or less), get a manual (30 or 40 bucks or 5 bucks for a pdf) and do-it-yourself, you will be way under dealer cost and have a better understanding for your machine, clutches come with instructions and repair manuals are priceless when you have a motorcycle !!!
best of luck and happy riding !!!
994 views
Usually answered in minutes!
×