At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Ihave a 95 polaris magnum 425 4x4 the stator has 6 magnets inside have a flywheel from 96 that the magnet is one continouse circle inside will this work and was it a desighn change
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the Flywheel key. It should be locked under the pull cord, where the stator is located. I will be a small piece of metal that slides into the spline from the engine and the stator. If it is worn the stator will rotate off the spline and the timing will be off, she won't start and if she does will be really rough and backfire, sputter and have power loss.
Check to see that the pinion gear of the starter is hooting out and engaging the flywheel.
And if it is working it is possible that you have missing tooth/teeth on your flywheel and the starter cannot turn over the engine because of that.
www.manualslib.com > ... > 325 MAGNUM 4X4 HDS A00CD32FA View and Download Polaris 325 MAGNUM 4X4 HDS A00CD32FA parts manual online.Polaris Automobile Accessories Parts Manual. 325 MAGNUM 4X4 HDS ...
Some of the Polaris have magnetic locking hubs there is a little black box up in front if I remember right it has three wires coming out of it I think two yellow and one red this unit controls the front hubs
I bypassed this control one time by running a low voltage 12 volt supply to the front hubs used a toggle switch to activate the 4wd when needed it was a old farm bike and the guy did not want to spend the money to replace the control box
×