Vehicle Historyhttps://www.vehiclehistory.com > questions > how-do-...
Apr 9, 2020 - The first thing You need to do is open the driver's side door, and sit down inside. Next, place Your key in the ignition, and turn it to the on ...
6 answers · Top answer: Resetting the 2003 Chevrolet Silverado security system is easy, and takes about 5 to 10 minutes. The first thing You need to do is open the driver's side ...
JustAnswerhttps://www.justanswer.com > GMC Questions
Jan 10, 2013 - 30 minute GM relearn procedure: 1-Turn ON the ignition, with the engine OFF. 2-Attempt to start the engine, then release the key to ON ( ...
1 answer · Top answer: HI, What is happening - is the security light staying on and truck not starting, or is the ...
JustAnswerhttps://www.justanswer.com > Chevrolet Repair
Jan 4, 2010 - Bump the key into the start position then leave it in the on position for 10 minutes, after 10 minute shut vehicle off for 5 seconds and ...
1 answer · Top answer: Ok, let me know. Thanks
..
could be stopped up air filter, fuel filter, or weak fuel pump...try cycling the ignition on several (3 or 4) times and see if it starts any faster...sign of a weak fuel pump.
Here are the tie rod end nut torque specs:
• Lower Control Arms - (Front and Rear bolt) 129 ft-lbs x2 and (Knuckle Stud) 37 ft-lbs
• Upper Control Arms - (Front and Rear bolt) 140 ft-lbs x2 and (Knuckle Stud) 37 ft-lbs
• Inner Tie Rods - 81 ft-lbs
• Outer Tie Rods - (Knuckle Stud) Tie Rod nut 44 ft-lbs and jam nut 55 ft-lbs
• Stabilizer Links - 17 ft-lbs
• Rear Shocks - Lower and Upper 85 ft-lbs
• Front Shocks - Module Bolt x2 37 ft-lbs, Module nut x3 37 ft-lbs and Stud nut 37 ft-lbs
the module is located under the center console , CAUTION WHEN WORKING ON AIR BAG SYSTEM, A CERTIFIED TECH SHOULD BE THE ONLY ONE TO WORK ON SYSTEM. this will avoid false deployment or failure of system in a crash.
The best solution you'll get from books at www.reliable-store.com
These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, atv, trucks. for klifts, boats, excavators etc
Running wires from external sensors is going to be a difficult job because you have to drop the headliner and the left A post cover for access to the wires. There are manuals available at auto parts stores that have diagrams, but you need to be sure that it covers the wiring for the new mirror.
HI,
Check the relay box under the hood - remove the relay related to parking lights and see if it goes out. If it does, replace the relay.
I've had these go bad in the past and get stuck in the on.
Doug
If you still have a carburetor there is a needle and seat that controls the float and sometimes they stick in one position and will let to much gas into the engine and causing the spark plugs to foul and not fire.
I think you should go for manual first after that it would be easy for you to solve your problem. I had visited this site past 2 months before for my vehicle and find it quite helpful may be you will also get something useful here
GMC