Hyundai Elantra - Popular Questions, Answers, Tips & Manuals
2011 Hyundai Elantra 1.8L New engine but car doesn't move
It sounds like the issue with your 2011 Hyundai Elantra might be related to the output shaft speed sensor, especially since you're getting a P0722 error code. This sensor is crucial for the transmission's ability to shift gears correctly. Since the transmission was working fine before the engine replacement, it's possible that a connection to the sensor may have been disrupted during the process. I would suggest double-checking the sensor's connection and wiring for any signs of damage or loose connections. Also, ensure that there's no physical damage to the sensor itself. If everything seems intact, it might be a good idea to have the sensor tested or replaced.
What's does it mean when your P,R,N and D gears are blinking?
This usually indicates a problem with the transmission control module (TCM). You should have a qualified mechanic inspect and diagnose the problem, as it could be something as minor as a faulty TCM or something more serious such as a transmission failure. Replacement of the TCM or other components may be necessary to fix the issue.
2013 Hyundai Elantra radio goes black/flashes back on. Why?
This issue sounds like it could be related to a problem with the ground connection or the reverse gear sensor in your 2013 Hyundai Elantra. The radio may be losing power when the reverse gear is engaged and the car is on a hill, causing it to cut off and then come back on. Here are some things you can try:
- Check the ground connection for the radio. Make sure it is tight and securely connected.
- Check the wiring for the reverse gear sensor. Make sure it is properly connected and not damaged.
- Inspect the reverse gear sensor itself to make sure it is not malfunctioning.
- Check the voltage of the battery, low voltage can cause the system to shut off
- If none of these solutions work, it is recommended to have your vehicle inspected by a professional mechanic.
It is also important to have a professional diagnose this issue as it could be caused by multiple other electrical issues and a proper diagnosis is needed to find the root cause and prevent further damage to your vehicle.
All torque specs for 2012 hyundai elantra gls
a car.all cars made have service manual. every one.and all that is covered even a 3 inch think book.why not buy one from maker.or tell what country you are in .cars are not the same at all , in all countriessome have 5 or more engines choices and transmissions.check out Europe to learn that.nor did you say what is to be worked on, to torque.buy the book or if in USA read it here, at mitchell1 DIY online
https://eautorepair.net/Marketing/Default.aspbuy the book at the dealerpay on line or google all week long.
Dashboard lights/A C Display/BluetoothRadioPhone Monitor
some cars the dash has autodimmer
a sun sensor on the dash
some can be disabled , so read the users guide
to do that.
most cars, we can disable the out dim
in the free users guide, search word DIM.
bingo,? see on,off ,up ,down or auto?>
find the top of dash sun sensor
shine a very bright light there, and dash DIM goes full bright, if yes, bingo
see the users guide in the glove box yet
page 5-42 is your answer
see the words obstructs either sensor
bingo
it is in your manual this.
https://www.carmanualsonline.info/hyundai-elantra-2022-owners-manual/?srch=dim
Not finding what you are looking for?
