2009 Dodge Charger - Page 2 - Answered Questions & Fixed issues
2009 charger won't start
1st off is it getting spark ?2 things to try if you have went thru spark,fuel, ignition.Dodge cars and trucks have a cam shaft sensor, inexspensive and it sends info to motor, (Google it for location) also if your catalytic converter is clogged it wont start/run, bang on it and if you hear loose or ratteling in it then its clogged, punch a hole in it and if it starts then replace that and you are good to go.
8/20/2012 3:07:36 AM •
2009 Dodge...
•
Answered
on Aug 20, 2012
•
459 views
How can i raise the rpm on my 2009 dodge charger
The idle speed is not adjustable, there isn't even a throttle cable, the throttle blade is opened by a special type of electric "stepper" motor that is controlled by the Powertrain Control Module (PCM). No adjustment of any kind is possiable or provided for. I have a new Charger RT and I have the factory books, so 100% sure on this
12/2/2011 12:10:27 AM •
2009 Dodge...
•
Answered
on Dec 02, 2011
•
319 views
09 charger overheats at times,no
this could be something simple or serious, if there are no leaks but you need to add fluids you may have a gasket leak into the motor (head gasket?) and it is burning the fluid?.The thermostat may be stuck?,there may be a problem with the heater coil,Check to see if the fans are working and make sure all the fuses are good, make sure wires are not corroded or separated. When you say over heat do you mean the gauge says it is hot or the car steams from the motor, if this is the case I would suggest you take it in and have it tested once the motor reaches a certain temp gaskets are worn out, metal losses its temperament and you may start having more and more problem. sorry I have not been much help. contact me back if i can help I will.
11/12/2011 2:54:04 AM •
2009 Dodge...
•
Answered
on Nov 12, 2011
•
175 views
2009 charger with a v-8 hemi cranks but wont start
It can be alot of things from no fuel, vapor lock, fuel blockage, bad fuel, no spark, bad coil, ect.ect..The best and cheapest thing to do is go to the local parts supplie house ( here in ky its advanced auto or auto zone) and they will show you how yo use a hand held computer that you can hook up to your car and it will read the codes, then take it back to them and they can tell you what they mean, or the store sells books on your cars that gives all kinds of good maintenance info as well as the codes and how you can repair them. keep in mind dont do any repairs unless you are sure you can do them and it will NOT void any warranty. hopes this helps. if not please contact me and i will help.
11/12/2011 2:41:41 AM •
2009 Dodge...
•
Answered
on Nov 12, 2011
•
436 views
Even tho i have the dodge charger se . i would
I have a 6cyl 09 and i went to advaced auto here in ky, they sold me a exhaust adapter to slide into the exhaust pipe and i just had to drill a small hole and add a screw to hold it into place. it sound like a v8 with a large CAM.
11/12/2011 4:00:08 AM •
2009 Dodge...
•
Answered
on Nov 12, 2011
•
79 views
I have a 2009 dodge charger. I wanted to change my
in my opinion about cold air intakes, it is actually better to get a K&N drop in air filter.
you will get the same effect except the filter won't be sucking in HP robbing hot air from the engine
9/16/2011 10:37:05 PM •
2009 Dodge...
•
Answered
on Sep 16, 2011
•
227 views
Do i have to take the whole front to take out the
You should be able to take it out without taking anything off.Once you have the fans out remove the hoses and the transmission cooling lines and remove the brackets that hold the radiator in place and then pull the radiator straight up and it should come out fairly easy.A little tip for you,before putting the fans back in put cardboard over the fins of the radiator so you don't damage it.Then remove it when the fans clear the radiator.
3/11/2011 6:08:37 AM •
2009 Dodge...
•
Answered
on Mar 11, 2011
•
380 views
Serpintine belt broke
You will need a new belt of course. Do you need a diagram or instructions on how to put the belt on?
2/18/2011 2:13:26 AM •
2009 Dodge...
•
Answered
on Feb 18, 2011
•
82 views
Esp sign appear all the time
are you spinning the tires when it comes on? Or else take it in for warranty at Dodge, they can fix it easily
2/24/2010 12:50:41 AM •
2009 Dodge...
•
Answered
on Feb 24, 2010
•
120 views
Not sure on how to remove the back seat of my
The bottom of the seat is held by a clip on each end. Pull up on the front of the seat about a foot from each end. The back should have attachment bolts that are visable with the bottom removed.
8/7/2009 2:58:56 PM •
2009 Dodge...
•
Answered
on Aug 07, 2009
•
459 views
2016 Dodge Charger RT. Vibration gear downshifting 2 to 1.
Question edited for clarity.
No it isn't normal. There is probably a change solenoid or sensor issue. Take it to a transmission place and they will put it on a fancy scan tool computer. Tell them you want to see the results. Don't let them tell you that you need a new transmission!
What is the Firing order on my 2014 Dodge Charger Se 3.6 L
If this is the engine without a distributor the firing order is
1, 2, 3, 4, 5, 6,
The cylinder heads are numbered as odds and evens. Standing with the belts and pulley nearest to you, (the transmission furthest away), the left side is the odd numbers and the right side is the even numbers.
Number 1 is the left one nearest to you, number 2 is the right one closest to you, 3 is middle left and 4 is middle right, 5 is the far left and 6 is the far right cylinder.
Not finding what you are looking for?