20 Most Recent
Questions & Answers
What abs light means
It means there is a fault with your anti-lock braking system. You need to get it to a dealer who will read the fault using a code reader and fix the problem for you.
2009 GMC Acadia
on Dec 22, 2017
I have a 2009 GMC Acadia. What should the ERS mode be in on a normal basis?
Driver Shift Control (DSC) or Electronic Range Selection (ERS): This position (M-Manual / L-Low) allows the driver to utilize the DSC/ERS system. When the shift selector lever is moved to this position, the driver may select upshifts or downshifts by using the paddle switches located on the steering wheel/shifter. An upshift is requested by pushing either + button. Refer to the vehicle owner's manual for more specific DSC/ERS information.
Driver Shift Control (DSC)/Electronic Range Selection (ERS)
Refer to the owner's manual for specific instructions on DSC. The TCM will override shift commands when maximum engine speed is achieved and will protect from any downshift which may cause excessive engine RPMs.
Electronic Range Select (ERS) Mode
ERS mode allows you to choose the top-gear limit of the transmission and the vehicle's speed while driving down hill or towing a trailer. The vehicle has an electronic shift position indicator within the instrument panel cluster. When using the ERS Mode a number will display next to the L, indicating the current gear that has been selected.
To use this feature:
Move the shift lever to L (Low).
Press the plus/minus button located on the shift lever, to increase or decrease the gear range available.
When you shift from D (Drive) to L (Low), the transmission will shift to a pre-determined lower gear range. The highest gear available for this pre-determined range is displayed next to the L in the DIC. See Driver Information Center (DIC) and DIC Operation and Displays for more information. The number displayed in the DIC is the highest gear that the transmission will be allowed to operate in. This means that all gears below that number are available. For example, when 4 (Fourth) is shown next to the L, 1 (First) through 4 (Fourth) gears are automatically shifted by the vehicle. the transmission will not shift into 5 (Fifth) until the + (Plus) button is used or you shift back into D (Drive).
While in L (Low), the transmission will prevent shifting to a lower gear range if the engine speed is too high. You have a brief period of time to slow the vehicle. If vehicle speed is not reduced within the time allowed, the lower gear range shift will not be completed. You must further slow the vehicle, then press the - (Minus) button to the desired lower gear range.
Automatic Engine Grade braking is not available when the ERS is active. It is available in D (Drive) for both normal and Tow/Haul mode. While using the ERS, cruise control and the tow/haul mode can be used. See Tow/Haul Mode for more information.
© 2017 General Motors Corporation. All rights reserved
2009 GMC Acadia
on Oct 09, 2017
Not finding what you are looking for?