2008 Infiniti G35 - Answered Questions & Fixed issues

Fans turn off when the set temperature is brought back down. Connect your pro grade scan tool computer and monitor the temperature and sensors and the ECM controlling it all..

thing too check air filter has a sensor make sure it was pluged back up after changing, make sure cover is seated on filter. oil change there is a oil percent on menu it needs to be reset with oil change, once it hits 55% the computer will tell you to service soon. Azone can reset codes be sure to check for new codes before clearing. check for things around air box incase something was unpluged to service.

950!!! ridiculous, buy the fluids and do it yourself.

A rattle could be a lot of things. Many auto parts stores will do a free diagnostic readout of the code causing the check engine light to come on. I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Remove the key blade from the transmitter and you will see two small slots on either side. Use a small flat blade screw drive to carefully pry open the transmitter.

could be number of things wrong - take to a shop to have it diagnosed

check on google for the info or a shop manual

Put one hand on the steering wheel and rotate slightly left and right alternatively whilst turning the ignition key at the same time with the other hand. This might release the steering wheel and start ignition. Hope this helps.

Have to ask a dealer how you go about that No one has your radio code

it can be the electrical part of the ignition switch .that is sticking.

Im not too familiar with Infinity gauge clusters but, if all of the fuses are fine, I would guess that there is a wiring problem, possibly a poor connection, or that the bulbs for the odometer have gone dead.

you have to drain all the power steering fluid. simply unscrew the line unless its the one connected to the radiator then you will have to replace it or take it to a specialist. :)

I would have a local repair shop know all the details& have them work on the ABS Braking System

I hope is not going to engine.

Well it does not exactly evaporate. Coolant is oil based, so it does not evaporate like regular water.If you are loosing coolant, and there is no obvious leak, the engine could be burning it out the exhaust.

You need an OBII scanner to reset the light. You can buy one for about $60 or any good parts store can reset it for you, most will do it free

change the drivers button

if your steering wheel is shaking when you apply your brakes then the brake rotors need to be machined or replaced before they are machined ask the mechanic to check if they are under size if they are very close to the min size replace them it will save you money in the long run

possible cause hot brakes on car the driving threw snow , water or car wash

Question edited for clarity. Question moved to model category, (should have year as well). Check out the links, diagrams and the specialist forums. https://www.google.com/search?q=Nissan+Skyline+VQ37+tightening+torque+settings+for+conrods https://www.google.com/search?q=Nissan+Skyline+%2F+Infiniti+G37+tightening+torque+settings+for+conrods+VQ37+engine ..