20 Most Recent 2009 Mercedes-Benz CLS-Class Questions & Answers

Most are at least 12. 9 min.

Hi claude?
There is no deepstick for the engine oil. You can check your oil level from the steering wheel controls. Turn the ignition on, do not start the engine. press the page button till the milage and the trip miles are displaied. press the arrow button up or down till it comes up with engine oil level check, and wait till the engine has meassured the oil level.
If you want to change the oil, you need to measure how much oil comes out of the engine and put the same amount back in.

If your car with 5 speed automatic transmission there are special dipstick for it, it only have with dealers workshop, drive there and ask them need to check trans oil, if u found right dipstick you can check it your self, trans mission dipstick tube locate at back side the engine at right of middle, dipstick tube have covered by black cap with read lock, first you have to brake read lock and push remain read plastic lock inside the cap by small flat screw driver, and open cap, then keep engine running and check oil level if your car trans oil cold it should be the cold level on dipstick for check trans oil you must have better knowledge for that it mean oil level be deference and deference temperature better ask mechanic to check it, if your car have the 7speed trans mission you can't check oil level because it's need to plug diagnostics computer in to the your car and get trans oil in to 45 degree temperature, The oil temperature can check only diagnose CPU and also after rich the 45 degree temp need to open drain plug screw and check level for do this must need to get experience technicians service, is this information helped you?

Hi.

Water can get inside the door only through windows seal.

At the time of your car wash the windows may have not been closed properly, and even a little gap may have let water pass through.

Do a second test , pouring water on top of car windows and windshield. If water gets inside the car, go to a garage to check the windows seals.

The seals are important, because water can leak inside the body (particularly on doors) and cause corrosion and damage that will be noticed only after some times.

Regards.

the easiest way would be to pour the transmission fluid directly down the automatic dipstick hole via a funnel hope this helps regards Jim

Transmission Out shaft issue https://www.google.com/search?q=merecedes-Benz+actros+mp11+gs+19+error+code

ACTROS GS 19

MHH AUTO https://mhhauto.com > Thread-ACTROS-GS-19 Apr 7, 2019 - It means that transmission out shaft is spinning...it must be stopped all time of learning. Now, if your vehicle is lifted, 1 wheel is spinning, ... Actros Fault codes - MHH AUTO - Page 1 9 posts Jun 21, 2011 actros fault codes needed - MHH AUTO - Page 1 4 posts Jun 10, 2011 Fault code GSII 18 on Mercedes Axor help please!!! 3 posts Sep 12, 2019 Mercedes Actros power shift fault - MHH AUTO - Page 1 9 posts Sep 27, 2014 More results from mhhauto.com ..

Question edited for a lot more clarity.Question moved to model category.Sometimes they are just on, and sometimes the SRS will flash. Connect to a pro grade scan tool computer and look for the diagnostic trouble codes associated with the fault status.https://www.google.com/search?q=Mercedes+W169+SrS+system+light+on..

Question edited for a lot more clarity, and add maker. Question moved to maker category. These are all function of the Body Control Module. You need an auto electrician with a pro grade scan tool computer and access to factory technical bulletins. https://www.google.com/search?q=mobile+auto+electrician+near+me No clues in here.

Mercedes-Benz Vito / Viano (W639; 2004-2010) fuses

Fuse Box Diagrams https://fuse-box.info > mercedes-benz > mercedes-ben... The fuse box is located in the engine compartment on the passenger's side. The location of the fuses in the engine compartment: Mercedes-Benz Vito / Viano. ..

In the link https://www.google.com/search?q=MERCEDES-BENZ+E-Class+%28W211%29+serpentine+belt+schematic ..