20 Most Recent 2013 Chevrolet Spark Questions & Answers

My info shows this 20 amp fuse for cigar lighter. Not only check the fuse, check the fuse circuit for voltage. Your owners manual may tell you which fuse does what.

check headlight fuse

The new cars have a electronic wheel sensor that feeds the odometer. you may need to reset the sensor to the odometer connection. I would google it or read how on a Spark forum page. There are several. they have tons of info. I just saw the year so this is the wrong answer for a 2013. Sorry!FOR an older car ---> then: The first thing I would check is where the cable connects to the ODOMETER.. If that comes unscrewed the odometer will stop.There is a screw in connection where the cable fits into the transmission. If that comes unscrewed it will stop working. BUT YOU WORKING NEAR THE ODOMITER SO CHECK THE BACK OF THE ODOMETER AND SEE IF YOU PULLED OR PUMPED SOMETHING LOOSE. I also think it's possible that a wire on the wrong place could cause the odometer to stop. If the cable connections areok and wires are connected correctly then the turning cable is broken or the gauge itself.I'M HOPING THIS HELPS. ALSO HOPING YOUR NEW IGNITION SWITCH WORKS TOO! {I wish I knew if all readings on the odometer stopped. But I don' t.}.

dealership. should still fall under warranty repair.

The sensors in the seat detect weight and assume there are occupants in the seats without the seat belts done up and this then triggers the warnings. If you are carrying items on the seat that bounce when you hit a bump that may trigger the alarms. Even movement in the seat unit itself when you hit a decent bump could trigger the sensors. Just keep the rear seat belts done up and you will not have a problem with false warnings.

Which one? It probably has about six of them. The most prominent one is under the console, in between the seats.

Code 82, means time to change your oil. When you get your oil change, and they reset your indicator

MIGHT BE A SENSOR ISSUE CHECK WITH GM FOR A RECALL

FIRST USE NEW HEADBOLTS. NOT THE OLD ONES. GO UP IN TORQUE IN 3 STAGES FIRST ALL THE BOLTS IN SEQUENCE TO 25LBS. SECOND ALL BOLTS IN SEQUENCE TO 50LBS. THEN FINALLY ALL BOLTS IN SEQUENCE TO 75LBS

Hello. It seems your Chevrolet truck's ignition 'infeed' coil wire(s) are 'burnt out'; causing that coil NOT to 'fire'. Good luck and keep me informed; if you want to.

Valve Clearance Settings?: Hi, Could You Please Provide Me ...

www.2carpros.com > ... > Valves > Adjust

Feb. 3, 2020 - Hi, could you please provide me with the valve clearance settings and well as the ... MEMBER; 2010 CHEVROLET SPARK; 0.8L; 3 CYL; 2WD; MANUAL; 260,000 MILES ... The material I have on the 1.0 S-Tec engine shows:

chevrolet spark valve clearance Questions & Answers (with ...

www.fixya.com > tags > chevrolet_spark_valve_clearan...

Hope this helps GASOLINE ENGINE TUNE-UP SPECIFICATIONS Year ... Hi, I need the valve clearance settings for my Chevrolet Spark Lite, 0.8L, 2010 Model.

SOLVED: What is the tappet clearance on a chevrolet spark ...

www.fixya.com > Forum > Cars & Trucks > Chevrolet

Jul. 29, 2016 - I just did the valve clearance on the engine of my SJ413 that has the 1000cc engine of an SJ410 : When cold: 0.13mm Intake and 0.18mm ...

This is not a free resource: www.alldata.com

I found this info. Note, these databases are not always correct, but, it's all I have.

I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years