20 Most Recent
2011 Dodge Charger - Page 6 Questions & Answers
Changing serpentine belt on a
diagram should be on the cross member as you open hood or on the underside of hood , if not i've attached a schematic
2006 dodge charger sxt 3.5
Try a repair shop that has been around for 15 years or more. They are dependable and far cheaper if still in business
P2181
Dear please check coolant system if there is any water escape
and check thermostat
i have got same this code before and was thermostat was not working well
My 2012 dodge charger won't start!! At first it
Take your key back to the dealership and have them give you a new one. They have everything on computer and will have the vin code to your vehicle and there is only ONE key with the electronics that will work.
What kind of battery do I need for my 2011 Dodge Charger fob?
The key fob uses a commonly-available watch battery. You can find these wherever watch or hearing-aid batteries are sold, typically department or grocery stores.
As for which battery to purchase, this is made a little more complicated due to the fact that different battery manufacturers use different alphanumeric codes to describe the same battery. Energizer and Duracell will use different designations for what is the exact same battery, for instance. You will have to take the depleted battery into the store to visually compare for size.
07 charger steering wheel don't lock in park
There are pins in the column that get bent and broke. Open up column, identify them and. Heck for damage. If you've also had symptoms of shifter not alligning with the selector, you can adjust a stretched shifter cable at the transmission to make it tighter.
I HAVE A 2007 DODGE CHARGER AND CAN NOT SHIFT OUT OF PARK. WHAT COULD BE THE PROBLEM?
Sounds like the gearshift interlock is not working. I assume you know you have to hold your foot on the brake with the ignition switched on. Check all the fuses. If they're ok you may need to take it to an auto electrician unless you can find the fault in the interlock system yourself. It may be that the switch may be faulty or out of adjustment. It is located down on the brake pedal.
Remove stuck ring from groove
you can heat it GENTILY ,soak it in penetrating oil ,there is a tool out there for removing rings (NOT A SCREW DRIVER)
Not finding what you are looking for?