20 Most Recent
2010 Dodge Nitro Questions & Answers
Heating problems
Check for air in the cooling system - tighten carefully all hoses especially ones by expansion tank. If motor on cool down sucks in air instead of water an air bubble could restrict the flow of coolant into the heater core.
How do i replace airbag control module on 2010 dodge nitro
Remove the center console. It is under it. Better make sure that is the problem though. Could be wiring. Lots of things to check before replacing any part of it. This is the most common reason cars are totaled, Air bags. Even if they weren't deployed.
How do i fix a stuck blend door on 2010 dodge nitro?
I would pull off the blend door actuator and swap it out with a new one. Or another option is to swap it out with one of the other actuators. The blend door actuator is interchangeable with the actuators for the mode-air doors and the recirculation-air door.
Disconnect and isolate the negative battery cable.
If equipped, remove the silencer from below the driver side of the instrument panel.
Disconnect the wire harness connector from the blend door actuator located on the driver side of the air distribution housing.
Remove the two screws that secure the blend door actuator to the actuator mounting bracket and remove the actuator
Not finding what you are looking for?