20 Most Recent
2011 Dodge Ram Pickup 1500 Questions & Answers
Alpine wiring diagram
If you contact Alpine they will be able to tell you if there is an adapter that will plug right into your existing OEM harness. If not then, you'll have to figure out Which wires are which on your OEM harness, here is the Alpine wire code:
Alpine wiring help
HU harness color code pretty much universal.
red=ignition
yellow=battery +
black=ground
blue/white=remote turn on
blue=power antenna
pink/black=audio interupt in (not sure if you have one)
speaker wires
gray=right front
violet=right rear
green=left rear
white=right rear
speaker wire with black stripes is negative.
Belt routing diagram for 2011 dodge 5.7 hemi
Hi Alan:
Just for fun, look at the underside of the hood.
Sometimes there is a diagram there.
Otherwise figuring it out is sort of like a logical jigsaw puzzle.
Grooved side in goes on outside of crank and driven pulleys.
Smooth side out and goes on inside of idler pulleys and tensioner pulleys.
Cheers
Replace serpentine belt on dodge 1500 ram with hemi
You can get a diagram from the dealer and the idler tension is the first you start to remove the belt and the last place you connect your belt. Today's car and trucks are very easy to replace the belt. I learned you start at the bottom and work your way up to the tensioner. Go for it. It's easy work
Key is stuck in ignition receiving no electricity
You are not the only one:
www.fixya.com/.../t14560159-
key_
stuck_in_ignition_wont_start_
dodge
Oct 6, 2012 - key stuck in ignition, wont start, dodge ram pickup - Dodge Ram 1500question. ... 631 Answers. SOURCE: 1999 Dodge Ram 1500 Pickup error code p0171. This code means ... Jun 28, 2011 ' 1987 Dodge Ram 50 ยท 1 Answer .
Not finding what you are looking for?