20 Most Recent 2010 Mitsubishi Outlander Questions & Answers

0 Answers

2010 outlander - window defroster on drivers side has very low airflow. Does a poor job defrosting. Any suggestions?

2010 Mitsubishi... | Posted on Sep 11, 2017 | Be the first to answer

0 Answers

2010 outlander-the fuel cover release cable has broken. How do I replace it?

2010 Mitsubishi... | Posted on Sep 11, 2017 | Be the first to answer

1 Answer

What type of transmission fluid should I use for my 2010 Mitsubishi Outlander as an alternative to CVTF-J1 which I cannot find here in Lilongwe, MALAWI?

AMSOIL SYNTHETIC CVT FLUID SHOULD BE AVAILABLE AT YOUR LOCAL PARTS HOUSE

2010 Mitsubishi... | Answered on Feb 21, 2017

1 Answer

Mitsubishi Outlander 2010 driver seat stuck, the seat wont recline backward? How do I go about solving this frustrating issue?

May require removal of seat upholstery to gain access to linkage. Might be best to check with an upholstery shop as they probably know all about this.

2010 Mitsubishi... | Answered on Jun 24, 2016

1 Answer

2010 mitsubishi outlander no start no crank

check all your fuses as a first step

2010 Mitsubishi... | Answered on May 28, 2015

Tip

2010 Mitsubishi Outlander No Start, No Crank, No power locks, No radio, No communications with all modules

Disconnect negative battery cable for 2 minutes, with the ignition switch in the on position, re-connect negative cable. The alarm may go off, Use the unlock button on the remote to shut it off. Shut the hood and start the truck. Hope this works for you as well as it did for me after 2 hours of wasted diagnostics. Good Luck!

on May 28, 2015 | 2010 Mitsubishi Outlander

1 Answer

Is there a relay switch for wipers on a outlander 2010

yes a block of them,or a few in one black box

2010 Mitsubishi... | Answered on Feb 13, 2015

0 Answers

The ignition switch will not lock.

2010 Mitsubishi... | Posted on Feb 11, 2015 | Be the first to answer

1 Answer

Where is the fuse for my second power source in the middle console of my 2010 mitsubishi outlander

DONT KNOW

2010 Mitsubishi... | Answered on Sep 02, 2014

0 Answers

Mitsubishi outlander check engine light is on and fault code is p 1773 and u 0121.

2010 Mitsubishi... | Posted on Jul 13, 2013 | Be the first to answer

0 Answers

How to install base antenna outlander

2010 Mitsubishi... | Posted on Mar 25, 2013 | Be the first to answer

0 Answers

How do i change transmission filter/fluid on a 2010 mitsubishi outlander

2010 Mitsubishi... | Posted on Jan 13, 2013 | Be the first to answer

1 Answer

Outlander/Peugeot 4007 reversed into stump and smashed oil resivour near diff

Sorry you will need a shop to access the damage.

2010 Mitsubishi... | Answered on Oct 30, 2012

0 Answers

Diagram fuse box diagram 2010 mitsubishi outlander

2010 Mitsubishi... | Posted on Oct 08, 2012 | Be the first to answer

0 Answers

Mitsubishi outlander 2010 no air out of face vents

2010 Mitsubishi... | Posted on Oct 03, 2012 | Be the first to answer

1 Answer

Good Day, I have change pad and rotor on my Outlander 2010 V6 LS today. There is a shim on the opposite side of galiper cylinder.....do I need to add this shim on the new jobber pad ? (front) There is

martin,I've a lot of work on all kinds of equipment,And I strongly b eleived that if it came with the shim's that you should put them back I'm like this mechanicly they were ment for a reason. be it nose reduction or what, Iwould check with dealer to play it safe.

2010 Mitsubishi... | Answered on Sep 03, 2012

1 Answer