20 Most Recent 2010 Mitsubishi Outlander - Page 6 Questions & Answers

check the remote battary if not good change and check the signal to unit olso

it is worht checking the fuses and also keep working the hazard light switch as they are not used that often they tend to get sticky on the con tacts and that will knock out your indicators as well if they start to work after working afer working the haz switck then change the switch

Probably. Cheap place to start.

might be your lifters, or a bad connecting rod bearing

not as such but the CPU will put it in limp mode which is reduced power and speed

I would check the inside of your oil cap. if it has a white or milky residue texture you have a blown head gasket or head. have that checked. good luck

While driving, slightly turn the wheel left and right, to see if the noise gets louder and quieter. If it does, you have a wheel bearing that is failing. Then you need to isolate which side is making noise and have it replaced. SOON

You have to let it set for around an hour with engine off and key in the on position to get it back to code then you will need the serial number off the top of the radio and call a mitsu dealer n they will give you your correct code

Whats your question?

check coolant level, and for leaks, check for cooling fan operation, if those are good and working, possibly blockage in radiator or thermostat problem