Top 20
2010 Mitsubishi Outlander Questions & Answers
2010 Mitsubishi Outlander No Start, No Crank, No power locks, No radio, No...
Disconnect negative battery cable for 2 minutes, with the ignition switch in the on position, re-connect negative cable. The alarm may go off, Use the unlock button on the remote to shut it off. Shut the hood and start the truck. Hope this works for you as well as it did for me after 2 hours of wasted diagnostics. Good Luck!
Need to find wiring to and from fuel sending unit in2008 outlander
Hope this helps, the color code is at the bottom. I looked up your year--make--model in my database, 2.4L engine. At the main fuel level sensor at the bottom, the top wire should be voltage, the bottom black wire is ground. I did see a couple trouble codes for fuel level sensor, one was a po code, the other was manufacturer specific code. I know nothing about this vehicle other than what my database shows. good luck
7/14/2019 1:22:27 PM •
Mitsubishi...
•
346 views • 0 helpful votes
Not finding what you are looking for?