20 Most Recent
2010 Nissan Frontier Questions & Answers
How do i change my oil?
Remove filler cap,
lift car
then from under the car remove oil pan drain plug.
Allow oil to drain into an oil waste pan.
Change oil filter also ..located under skid plate..use filter wrench to remove filter. Be careful as filter is full of oil ..drain in waste pan
wipe filter mounting plate clean..put a thin coating of oil on new filter gasket before spinning it on to the mounting plate..hand tighten and then tighten about 3/4 more turn.. reinstall drain plug. do not over tighten or you can strip the threads. Install correct viscosity and amount of oil start engine. let run to get pressure up. shut off engine, check level with dipstick and close cap....you are done.
How do i change brake pads
remove wheel then remove caliper compress the caliper piston remove old pads and install new one and reinstall caliper and wheel
How to change brake pads on a 2010 Nissan Frontier
double posted verbatim
all 4? and emergency brake parts./
my guess, is hubby yelling from lot?
why not RTM
why not say all things you are replacing , in the system.
my car has 4 disk brakes and 4 hidden emergency brake shoes .
for a total of 12 pads/shoes.
see?
what are you doing, and to what extent.
Not finding what you are looking for?