20 Most Recent
2010 Nissan Rogue - Page 8 Questions & Answers
Why is my 02 nissan xterra supercharger 3.3 v6 is not running any better after I change crankshaft position sensor
The crankshaft position sensor's function is to let the PCM know the crankshaft's position, so fuel, spark timing etc can be fine tuned, based on engine load and driving conditions.
Some vehicles cannot start with a faulty or failed CPS, while others can but will have poor drivability.
Did you change your CPS because it was confirmed to be faulty or did you change it to improve the engine's running conditions? Did you pull any OBDII codes that pointed to the CPS circuit, before replacing it?
Chance are the CPS wasn't the cause of the issues you had.
Where is the inertia switch on a nissan maxima 2000
There isn't one. Easiest way to diagnose the fuel system is at the fuel pump relay. Make sure there is a good 12v supply and solid ground at the relay. Insert a jumper wire across the load side of the relay which would provide the pump a constant 12v supply. If it doesn't run, it's time to drop down the tank and see if you have 12v to the pump. If so, it's probably time for a new pump
2007 Nissan Armada Where is the TMC located at?
Are you looking for the location of the TCM (Transmission Control Module)?If so, you'll have to remove the transmission's valve body in order to access the TCM. You get to it by first removing the transmission fluid pan.
Not finding what you are looking for?