2001 Mitsubishi Montero Sport - Answered Questions & Fixed issues
Suction valve
Try to put some lubricat or ang connector cleaner to socket
11/14/2022 10:56:44 AM •
Mitsubishi...
•
Answered
on Nov 14, 2022
•
479 views
Where is the pcv located on the Mitsubitsi Montero Sport ?
you can get guide from many sites.. i know few
like reliable-store
error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered
within seconds u can get the access and it's totally illustrative complete
9/16/2021 10:29:56 PM •
Mitsubishi...
•
Answered
on Sep 16, 2021
•
604 views
How do you remove, clean, and attach an EGR valve in a 2001 montero sport xlsn3.0 V6
The hardest part of this repair is removing the two nuts. Soak them with penetrating oil first. If the nuts loosen stop and remove the vacuum line. Then remove the two nuts and pull off the EGR valve. A 90deg. mini pick and carb cleaner can be gently used to remove carbon buildup in both chambers. Before getting too carried away with cleaning. You should perform a vacuum test. Find out if the diaphragm is intact or leaking. Also see if the plunger moves freely when vacuum is applied. Sometimes the old gasket can be reused but don't count on it. They do break and if so both surfaces will need to be thoroughly scraped and cleaned. Let me know if there is anything else. Good luck.
7/14/2019 3:24:04 AM •
Mitsubishi...
•
Answered
on Jul 14, 2019
•
148 views
I changed the radio in my1998 Montero sports do i need a code because it not working
Radio units when disconnected from the battery supply lock as an anti theft feature.
New units are usually supplied with the code in the paperwork it came with. With a used unit you will need the serial number marked on the side or the back of the radio. You can use this to find the code on lots of specialist websites.
Try more than one as some will charge for the service and others don't.
3/6/2019 10:36:44 PM •
Mitsubishi...
•
Answered
on Mar 06, 2019
•
47 views
Looking for wiring diagram for dash lights 1986 montero
Find where the ground wire for that left taillight grounds to the body remove the screw and clean that ground, otherwise if the taillight assembly uses a printed circuit could be a break in the printing, replace the whole assembly if thats whats going on.
12/19/2017 8:55:37 PM •
Mitsubishi...
•
Answered
on Dec 19, 2017
•
179 views
I have problem with the
IF the skid control light went on, then there's a trouble code stored in the computer. Get the code read is ALWAYS the first step before asking for help. Otherwise you just get wild guesses that are mostly wrong.
10/14/2017 6:06:05 PM •
Mitsubishi...
•
Answered
on Oct 14, 2017
•
145 views
I have a 1998 mitsubishi
take the pan off clean both surfaces the tranny and the pan put an 1/8th " bead around the pan making put the bolts in the holes let dry for 20 to 30 min then put it together evenly torque the pan down from side to side and im sure the autoparts knows the correct fluid and how much
9/3/2017 6:28:56 AM •
Mitsubishi...
•
Answered
on Sep 03, 2017
•
63 views
Dear Sir,
My mitsubishi Nativa glow
A shorter time period could help also the brand name is in important, I ,ve found over the years that N.G.K. to be very good,also check the earth wire is clean and tight.
4/24/2017 11:49:03 PM •
Mitsubishi...
•
Answered
on Apr 24, 2017
•
109 views
Not finding what you are looking for?