20 Most Recent
2015 Fiat 500 Questions & Answers
2009 Fiat 500. Yellow triangle on dash 'check running lights', but both running lights are working?
This appears to be a well known issue. I found this
Solved maybe
.
I had the same issue when i changed one of the Daylight Running Lights in the front and one of my rear brake lamps.
I ended up changed both brake lamps since its a two pack, the front lights all looked well.
The rear, one was off even if i changed both.
I was puzzled but then tried to turn off my DRL from the menu section on the front panel which didn't work.
Opened the brake lamps and checked them again and they all worked.
I reset my error codes (check your manufacturer book) mine was 5 pumps with engine off then key out and then engine on.
The "check running lights" code disappeared as well. Make sure to check all your lights are on(front back.
Hope that works for one of you at least!
and also
I has the exact same issue. DRL going out when headlamps turned on. I found the problem. It's a simple fix.
It was a bad connection between the bulb and the bulb holder. I noticed wiggling the bulb made it come on and off.
The fix is to bend the exposed wires on the bulb so that they stand proud rather than squashed flat against the bulb.
I did it by gently prizing them away from the bulb and then I put a small screw driver underneath it and pressed the wire back down again. You could use a cocktail stick or march stick or similar.
This makes the contact between the bulb and the holder tighter. Job done.
Lots more here.
https://www.google.com/search?q=2009+Fiat+500.+Yellow+triangle+on+dash+%27check+running+lights%27
..
DoraMy Fiat Uno 1100 would
I got a uno 1100 that if u park it at night the next morning if u syart it and put it in to revers gsar there is nothing but wil go forward, u can put it in neutral but it wil still be in 2ed gear and if u select 5th the gearbox wil lock up so i recon it selecs 2 gears at one time.
I have a fiat 500
step one.
Open the door and tell me if you hear a small noise from the oil pump of the gearbox for 3 seconds.
if you hear more than 3 (like 5) means that the pump cant get enough pressure so the problem is the oil LEVEL.
step two
open bonnet and check on the drivers side the gearbox oil level however you may connect it to a diagnostic and chek if the pressure is 40-42 bar.
step three
lift the car and check if the selector that is attached to the gearbox has leak .
the selector is a multiple metalic mechanism that looks like the enterprise starship of startrek :P
Most possible faults on 500 gear fails are
oil level or the change mechanism that has inside leaks due to rubber rings fail ;)
I need the specs for
fiat punto ,1.2 its a valve free engine so it will not bash the valves ,the bottom pulley mark points at teh top ,you will seea corresponding mark and the cam is top left hand side ,you will see another coresponding mark their for the cam on the ally rocker cover
Not finding what you are looking for?