1999 BMW 318 - Answered Questions & Fixed issues
Gear monitoring 4
The
following are the general instructions on the start of diagnosing any
electronically controlled engine or transmission problem.
The
engine and the automatic transmission (transmission control is
only for automatics, engine is still computer controlled no matter
the transmission type) in this vehicle are computer controlled and in
most cases when a fault occurs a fault code is stored in the memory
of the computer control module. There are exception to this, such as
the Mass Airflow Meter and fuel pressure problems. What must be done
is to have all the basic testing done such as a scan of the system
for fault codes as well as a check with a live data scanner tool for
engine functions that are not within range of normal, a trained
technician is required to know what is correct and what isn't, then
based on careful diagnostics done from a factory repair manual the
correct part is replaced or the wiring repaired or the computer
replaced (known as the PCM or ECM,ECU), which is very rarely the
problem. Other basic checks must be done as well such as mechanical
problems with the engine as well as engine state of tune and mileage
on the engine. The transmission can have mechanical issues as well
such as no gear engagement at all or a failed pump or other pressure
related problems. Also engine mechanical problems can and do cause
many drive-ability related problem such as rough idle and other
symptoms.
5/17/2020 7:43:57 AM •
1999 BMW 318
•
Answered
on May 17, 2020
•
2,037 views
BMW 318 dash light not coming on
If the dashboard lights on your BMW 318 are not coming on, there could be a few potential causes. Here are some steps you can take to troubleshoot the issue:
- Check the fuses: Locate the fuse box in your BMW 318 and check the fuse that corresponds to the dashboard lights. If the fuse is blown, replace it with a new one.
- Check the dimmer switch: The dimmer switch controls the brightness of the dashboard lights. If the switch is turned all the way down, the lights may not be visible. Make sure the switch is turned all the way up.
- Check the battery: If the battery is weak, it may not be providing enough power to the dashboard lights. Try jump-starting the car or charging the battery to see if this resolves the issue.
- Check the wiring: If the wiring that connects the dashboard lights to the battery is damaged or loose, the lights may not come on. Check the wiring and make any necessary repairs.
- Consult a mechanic: If none of these steps solve the issue, it may be a more complicated electrical problem that requires the expertise of a mechanic. A professional mechanic can diagnose and repair the issue to get your dashboard lights working properly again.
I have a bmw 3
Do you still have the owner's manual. And why didn't you just take a picture and post that
I have a bmw 316ti
with any BMW they have their problems, one is the central locking/immobilizer, the central locking is linked into the immobilizer and vice versa, the immobilizer takes it signal to disarm from the central locking and the ignition key ring. (chip in the key) if one of these starts to play up it has loads of consequences this being one of them. they all need to work together for the system to work properly. you would need to read the alarm and immobiliser codes using an ob2 tool that can detect them, and find the fault some problems it can be the drivers door sensor in the lock this is the main door as its drivers side and it controls all other doors on the central locking. if the switch is worn in any of it movements the system will not know the door has been opened, this does not work on the interior light as that is a switch in the door frame. the door lock is lock unlock and deadlock with key with remote fob its also arm disarm alarm and immobiliser. i have seen in some models there is a sensor auto lock so when you walk away with the key the doors lock automatically all lease parts work together. any one having a problem can cause no signal to be sent to the others in the system to start engine .
How to open hood BMW 328i 1997 cable snapped
Maybe you could check with three panel beaters on if the hood can be bent back or maybe they can spot weld onto the hood and pull it out. Like get three quotes and if you are paying for it like not insurance job or not let the panel beaters know when asking for a quote..
Not finding what you are looking for?